 |
 TEL 031-507-7294FAX 031-624-7294 H.P 010-7675-7184 |
 ID: momo7184 |
 aronpump@hanmail.net |
ARO PUMP
+ 더보기
1/2" Pro Series Non-Metallic Diaphragm Pump
ARO 1/2" Classic Style Non-Metallic
ARO 666053-344
Sale and Engineering Data sheet
Features:
- ARO has the world's best selling 1/2" ported diaphragm pump.
- Designed to meet your OEM application needs.
- Efficiency - Motor design delivers optimum air efficiency
- Reliability - ARO's patented 'Unbalanced' air valve ensures no-stall operation
- Versatility - Center, End, Dual Inlet / Outlet, and Swivel Top manifold configurations to fit your specific application
- Evironmentally Sound - Bolted construction for leak-free fluid handling
- Serviceability - Ease of service through modular design
Accessories:
- 76763 Wall Mount Bracket
- 67165-X Cycle Actuation Kit
- P39124-624 Piggyback Filter-Regulator
- 637141 Air Section Service Kit
- 637140-44 Fluid Section Service Kit
General information:
- Inlet/ Outlet: 1/2” 3 Piece Manifold
- Fluid Caps & Manifold Material: Polypropylene
- Seat Material: Polypropylene
- Ball Material: Teflon
- Diaphragm Material: Teflon
Have questions or need help? Call 419-633-0560
-Viton and Hytrel are registered trademarks of the DuPont Company - Kynar is a registered trademark of Arkema Inc. - Fluoraz is a registered trademark of Greene, Tweed & Co. Inc. - Santoprene is a registered trademark of Monsanto Company, licensed to Advanced Elastomer Systems, L.P. S
1/2" Pro Series Metallic Diaphragm Pump
1/2" Classic Style Non-Metallic
66605X-XXX
Maximum Flow gpm (lpm): 13 (49.2)
Maximum Discharge Pressure psi (bar): 100 (6.8)
Fluid Ports Inlet/Outlet (bsp): 1/2-14 N.P.T.F.-1
Material of Construction: Polypropylene, Groundable, Acetal, PVDF
Maximum Solids in (mm): 3/32 (2.4)
Maximum Dry Suction Lift ft (m): 15 (4.5)
Part of our Compact Series of pumps, our 1/2” classic pumps feature big performance in a small package. With flow rates up to 13 GPM (49.2 LPM) and a wide range of material and porting configurations.
Features
- ARO has the world's best selling 1/2" ported diaphragm pump.
- Designed to meet your OEM application needs.
- Efficiency - Motor design delivers optimum air efficiency
- Reliability - ARO's patented 'Unbalanced' air valve ensures no-stall operation
- Versatility - Center, End, Dual Inlet / Outlet, and Swivel Top manifold configurations to fit your specific application
- Evironmentally Sound - Bolted construction for leak-free fluid handling
- Serviceability - Ease of service through modular design
Accessories
- 76763 Wall Mount Bracket
- 67165-X Cycle Actuation Kit
- P29122-600 Piggyback Filter-Regulator
- 637141 Air Section Service Kit
- 637140-XX Fluid Section Service Kit
Pump Casing Materials
- Polypropylene
- Groundable Acetal
- PVDF (Kynar)
Diaphragm Materials
- Neoprene
- Nitrile
- Viton
- PTFE / Santoprene
- E.P.R.
- Polyurethane
- Hytrel
- Santoprene
Ratio: 1:1
Maximum Flow:
(ball) 13 g.p.m. (49.2 l.p.m.)
(duckbill) 10 g.p.m. (37.9 l.p.m.)
Displacement per cycle:
(ball) 0.04 g.p.m. (0.15 l.p.m.)
(duckbill) 0.032 g.p.m. (0.12 l.p.m.)
Air Inlet: (Female) 1/4 - 18 N.P.T.F. - 1
Fluid Inlet/Outlet: 1/2 - 14 N.P.T.F. - 1
Max. operating pressure: 100 psi (6.9 bar)
Suspended solids max. dia.:
(ball) 3/32” (2.4-mm)
(duckbill) fibers
Weight: lbs (kg)
Polypropylene 7.2 (3.3)
Groundable Acetal 8.8 (4.0)
Kynar PVDF 9.5 (4.3)
Maximum dry suction lift ft(m) : 15 (4.6)
Sound Level: 70 PSI 60 Cycles/Min 71.1 db(A)
Muffler: Integral, Included
1" Pro Series Metallic Diaphragm Pump
1" Pro Series Metallic
66610X-XXX-C
35 GPM (133 LPM)
Request More Information
Would you like more information about this product? Please contact us below, and we will connect you with a dealer in your area.
ContactOverview & Features
Features
- Mobility - Compact, rugged design allows for easy mobility
- Efficiency - Motor design delivers optimum air efficiency
- Reliability - ARO's patented 'Unbalanced' air valve ensures no-stall operation
- Versatility - Available in aluminum, cast iron or stainless steel to withstand tough chemical applications
- Environmentally Sound - Bolted construction for leak-free fluid handling
- Serviceability - Easy access to ball checks and fluid caps for maintenance and repairs
Accessories
- 66073-2 Air Line Connection Kit: contains Piggyback Filter / Regulator, pipe nipple & 5' section of hose
- 66100 Wall Mount
- 66975 Cycle Counter Kit
- 637118-C Air Section Service Kit
- 637119-XX-C Fluid Section Service Kit
Pump Casing Materials
- Aluminum
- Cast Iron
- Stainless Steel
Diaphragm Materials
- Viton
- PTFE w/ Santoprene backer
- Hytrel
- Santoprene
- Nitrile
- Neoprene
- E.P.R.
Document Library
Technical Documents
1-1/2" Pro Series Non-Metallic Diaphragm Pump
1½" Pro Series Non-Metallic
6661XX-XXX-C
100 GPM (378.5 LPM)
Request More Information
Would you like more information about this product? Please contact us below, and we will connect you with a dealer in your area.
ContactOverview & Features
Features
- Robust construction with thick walled injection, molded fluid casings and cast iron or aluminum center sections to withstand tough industrial applications.
- Efficiency - Motor design delivers optimum air efficiency
- Reliability - ARO's patented 'Unbalanced' air valve ensures no-stall operation
- Versatility - Multiple porting options for your application needs - Available in Flanged, Threaded, or 3 piece Manifold configurations
- Environmentally Sound - Bolted construction for leak-free fluid handling
- Serviceability - Easy access to ball checks and fluid caps for maintenance and repairs
Accessories
- 66084-1 Air Line Connection Kit: contains Piggyback Filter / Regulator, pipe nipple & 5’ section of hose
- 67079 Flange Connection Kit: converts connection to N.P.T.F. threading configurations
- 66975 Cycle Counter Kit
- 637118-C Air Section Service Kit
- 637165-XX Fluid Section Service Kit
Pump Casing Materials
- Polypropylene
- PVDF (Kynar)
Diaphragm Materials
- Viton
- PTFE w/ Santoprene backer
- Hytrel
- Santoprene
- Nitrile
- Neoprene
- E.P.R.
Document Library
Technical Documents
1-1/2" Pro Series Metallic Diaphragm Pump
1½" Pro Series Metallic
6661XX-XXX-C
90 GPM (340.7 LPM)
Request More Information
Would you like more information about this product? Please contact us below, and we will connect you with a dealer in your area.
ContactOverview & Features
Features
- Mobility - Compact, rugged design allows for easy mobility
- Efficiency - Motor design delivers optimum air efficiency
- Reliability - ARO's patented 'Unbalanced' air valve ensures no-stall operation
- Versatility - Available in aluminum, cast iron or stainless steel to withstand tough chemical applications
- Environmentally Sound - Bolted construction for leak-free fluid handling
- Serviceability - Easy access to ball checks and fluid caps for maintenance and repairs
Accessories
- 66084-1 Air Line Connection Kit: contains Piggyback Filter / Regulator, pipe nipple & 5’ section of hose
- 67174-15 Screened Inlet Kit
- 62133 Wall Mount
- 66975 Cycle Counter Kit
- 637118-C Air Section Service Kit
- 637124-XX Fluid Section Service Kit
Pump Casing Materials
- Aluminum
- Cast Iron
- Stainless Steel
Diaphragm Materials
- Viton
- PTFE w/ Santoprene backer
- Hytrel
- Santoprene
- Nitrile
- Neoprene
- E.P.R.
Document Library
Technical Documents
2" Pro Series Non-Metallic Diaphragm Pump
2" Pro Series Non-Metallic
6662XX-XXX-C
145 GPM (548.8 LPM)
Request More Information
Would you like more information about this product? Please contact us below, and we will connect you with a dealer in your area.
ContactOverview & Features
Features
- Robust construction with thick walled injection, molded fluid casings and cast iron or aluminum center sections to withstand tough industrial applications.
- Efficiency - Motor design delivers optimum air efficiency
- Reliability - ARO's patented 'Unbalanced' air valve ensures no-stall operation
- Versatility - Multiple porting options for your application needs - Available in Flanged, Threaded, or 3 piece Manifold configurations
- Environmentally Sound - Bolted construction for leak-free fluid handling
- Serviceability - Easy access to ball checks and fluid caps for maintenance and repairs
Accessories
- 66084-1 Air Line Connection Kit: contains Piggyback Filter / Regulator, pipe nipple & 5’ section of hose
- 67080 Flange Connection Kit: converts connection to NTPF threading configuration
- 66975 Cycle Counter Kit
- 637118-C Air Section Service Kit
- 637165-XX Fluid Section Service Kit
Pump Casing Materials
- Polypropylene
- PVDF (Kynar)
Diaphragm Materials
- Viton
- PTFE w/ Santoprene backer
- Hytrel
- Santoprene
- Nitrile
- Neoprene
- E.P.R.
Document Library
Technical Documents
2" Pro Series Metallic Diaphragm Pump
2" Pro Series Metallic
6662XX-XXX-C
172 GPM (651 LPM)
Request More Information
Would you like more information about this product? Please contact us below, and we will connect you with a dealer in your area.
Overview & Features
Features
- Efficiency - Motor design delivers optimum air efficiency
- Reliability - ARO's patented 'Unbalanced' air valve ensures no-stall operation
- Versatility - Combine with 67174-20 screened inlet kit and use for dewatering
- Environmentally Sound - Bolted construction for leak-free fluid handling
- Serviceability - Easy access to ball checks and fluid caps for maintenance and repairs
Accessories
- 66312 Air Line Connection Kit: contains Piggyback Filter / Regulator, pipe nipple & 5’ section of hose
- 67174-20 Screen Inlet Kits
- 66975 Cycle Counter Kit
- 637434 Air Section Service Kit
- 637432-XX Fluid Section Service Kit
Pump Casing Materials
- Aluminum
- Stainless Steel
- Cast Iron
Diaphragm Materials
- PTFE w/ Santoprene backer
- Hytrel
- Santoprene
- Nitrile
Document Library
3/8" EXPert Series Metallic Diaphragm Pump
3/4" Metallic
PD07R-XXS-XXX
Maximum Flow gpm (lpm): 13.6 (51.5)
Maximum Discharge Pressure psi (bar): 100 (6.9)
Fluid Ports Inlet/Outlet (bsp):
3/4 - 14 N.P.T.F.-2
Rp 3/4(3/4-14BSP, parallel)
Material of Construction: Aluminum
Maximum Solids in (mm): 3/32 (2.4)
Maximum Dry Suction Lift ft (m): 15 (4.5)
Part of our Compact Series of pumps our 3/4” metallic pumps feature big performance in a small package. They achieve flow rates up to 14.8 GPM (56 LPM) and offer a wide range of material and porting configurations.
Features
- Designed to meet your OEM application needs.
- Install directly onto your 3/4" application, saving you a fitting and a possible leak point.
- Efficiency - Simul-Shift™ valve provides ultra-positive, reliable shift signal
- Reliability - ARO's patented 'Unbalanced' air valve ensures no-stall operation
- Versatility - Compact design enables usage in limited space and other versatile locations
- Environmentally Sound - Bolted construction for leak-free fluid handling
- Serviceability - Easier service through modular design
Accessories
- 66073-1 Air Line Connection Kit: contains Piggyback Filter / Regulator, pipe nipple & 5’ section of hose
- 637438 Threaded Exhaust Kit
- 93110 Air Motor Muffler
- 76763 Wall Mount Bracket
- 637428 Air Section Service Kit
- 637427-XX Fluid Section Service Kit
Pump Casing Material
- Aluminum
Diaphragm Materials
- Santoprene
- Hytrel
- PTFE
Ratio: 1:1
Maximum Flow: 13.6-g.p.m. (51.5-l.p.m.)
Displacement per cycle: 0.030-Gallons (0.11-Liters)
Air Inlet: (Female) 1/4 - 18 P.T.F. SAE Short
Fluid Inlet/Outlet:
3/4 - 14 N.P.T.F.-2
Rp 3/4 (3/4 -14 BSP, parallel)
Max. operating pressure: 100-psi (6.9-bar)
Suspended solids max. dia.: 3/32” (2.4-mm)
Weight: lbs (kg)
PX07R 8.74 (3.96)
PX07A 11.0 (4.99)
Maximum dry suction lift: ft (m) 15 (4.5)
Sound Level: 70 PSI 60 Cycles/Min 75 db(A)
Technical Documents
ARO PUMP
+더보기
1/2" Pro Series Non-Metallic Diaphragm Pump
모델
PRO
직경
0.5
인치
재질
plastic
1/2" Pro Series Metallic Diaphragm Pump
모델
PRO
직경
0.5
인치
재질
metal
1" Pro Series Metallic Diaphragm Pump
모델
PRO
직경
1
인치
재질
metal
1-1/2" Pro Series Non-Metallic Diaphragm Pump
모델
PRO
직경
1.5
인치
재질
plastic
1-1/2" Pro Series Metallic Diaphragm Pump
모델
PRO
직경
1.5
인치
재질
metal
2" Pro Series Non-Metallic Diaphragm Pump
모델
PRO
직경
2
인치
재질
Non-Metallic
2" Pro Series Metallic Diaphragm Pump
모델
PRO
직경
2
인치
재질
metal
3/8" EXPert Series Metallic Diaphragm Pump
모델
EXPERT
직경
3/4"
인치
재질
metal
VERSAMATIC PUMP
+ 더보기
E6 1/4" DIAPHRAGM PUMP
E6 1/4" Pumps
Get reliable performance with the non-stalling, lube-free air valve system in Versa-Matic's E6 1/4” pump. Leak-free design reduces downtime, ensuring continuous, reliable pump performance.The E6 1/4" Pump...
- is self-priming
- male and female threaded manifolds
- provides an integrated muffler
- offers 90 degree manifold configurations
Download information from our literature page
Performance Chart |
|||
 |
|||
Specifications |
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
E8 3/8" DIAPHRAGM PUMP
E8 3/8" Mini-Matic™ Pumps
Versa-Matic® provides maximum performance in a mini package with our E8 3/8" pumps. Small enough to fit in your hand, yet capable of pumping up to 6.8 gallons per minute, these pumps can be mounted upright, sideways, and even inverted to adapt to your application. They also feature our patented Elima-Matic®® Air Valve System to deliver non-stalling, non-icing, lube-free operation as well as the elimination of blow-by. E8 pumps are available in Polypropylene and Kynar® wetted materials of construction, with XL (Santoprene®), Geolast® or PTFE interiors.
Download information from our literature page
Performance Chart |
|||
 Caution: Do not exceed 100 psig (6.8 bars) air supply or liquid pressure. |
|||
Specifications |
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
E5 1/2" DIAPHRAGM PUMP
E5 1/2" Pumps
Leak-free bolted construction provides a greater positive seal with Versa-Matic's E5 1/2" pump. Elima-Matic®'s air valve system provides the reliability you need and lets you transfer chemicals safely and confidently.The E5 1/2" Pump...
- is available in plastics and metals
- offers a corrosion-resistant air section
- provides variable porting options
- footprint interchanges with competitor models
- is self-priming and can run dry
Download information from our literature page
specifications
| English | Metric | |
| Flow Rate | ||
| adjustable to | 0-14 gpm | 0-53 lpm |
| Port Size | ||
| Inlet | 0.50" NPT | |
| Discharge | 0.50" NPT | |
| Air Inlet | 0.375" NPT | |
| Air Exhaust | 0.375" NPT | |
| Suction Lift | ||
| 15' Dry/25' Wet (6.096m/7.62m) | ||
| PTFE: 5' Dry/10' Wet (1.52/3.048m) | ||
| Max. Particle Size | ||
| (Diameter) | 0.0625" | 1.6mm |
| Shipping Weights | ||
| Stainless Steel | 18 lbs | 8.17 kg |
| Hastelloy C | 18 lbs | 8.17 kg |
| Aluminum | 15 lbs | 6.8 kg |
| Polypropylene | 10 lbs | 4.54 kg |
| Kynar® | 10 lbs | 4.54 kg |
| Groundable Acetal | 10 lbs | 4.54 kg |
E7 3/4" DIAPHRAGM PUMP
E7 3/4" Pumps
Depend on the Versa-Matic® E7 3/4" aluminum diaphragm pump for reliable use in lubrication, tyre filling, adhesive dispensing, OEM systems, and many industrial applications. The E7 3/4" pump...
- features the excellent Elima-Matic® air valve system
- shares standardised parts with the E5 1/2" pump range
- offers metallic or plastic air sections
- can be grounded (conductive models)
- features leak-free bolted construction
Download information from our literature page
|
|||||||||||||||||||||||||||||||||||||||||||||
E1 1" DIAPHRAGM PUMP
E1 1" Pumps
Versa-Matic's E1 1" pump uses the Elima-Matic air valve system to provide non-stalling, lube-free performance. The E1 1" plastic bolted pump comes in optional and standard porting models, and offers a flow rate of 0-125 lpm.
The E1 1" Pump...
- is available in either plastic or metal
- supplies a corrosion-resistant air section
- provides multiple porting options
- is self-priming
- offers center port and split manifolds on plastic bolted pumps
- offers UL listed models on bolted metallic pumps
Download information from our literature page
specifications
| English | Metric | |
| Flow Rate | ||
| adjustable to | 0-35 gpm | 0-132 lpm |
| Port Size | ||
| Inlet | 1.0" Female NPT (BSP) | |
| Discharge | 1.0" Female NPT (BSP) | |
| Inlet | 1.0" ANSI/DIN Flanged | |
| Discharge | 1.0" ANSI/DIN Flanged | |
| Air Inlet | 0.375" NPTF | |
| Air Exhaust | 0.50" NPT | |
| Suction Lift | ||
| 15' Dry/25' Wet (4.57m/7.62m) | ||
| PTFE: 10' Dry/20' Wet (3.05m/6.10m) | ||
| Max. Particle Size | ||
| (Diameter) | 0.125" | 3.17mm |
| Shipping Weight | ||
| Aluminum | 31 lbs | 14.07 kg |
| Stainless | 42 lbs | 19.05 kg |
| Hastelloy C | 42 lbs | 19.05 kg |
| Polypropylene | 24 lbs | 10.9 kg |
| Kynar® | 24 lbs | 10.9 kg |
E4 1-1/2" DIAPHRAGM PUMP
E4 1-1/2" Pumps
The Elima-Matic air valve system ensures continuous, reliable performance in the E4 1-1/2" pump. Available in both clamped and bolted models with a flow rate of 0-265 lpm, this durable pump can handle infinite variable flows up to 90% solids.
The E4 1-1/2" Pump...
- is available in either plastic or metal
- offers a corrosion-resistant air section
- is self-priming and dry running
- provides dimensional interchangeability with Wilden 1-1/2" metal pumps
- offers vertical discharge model on clamped metallic pump
Select a pump type to display the corresponding specifications and performance charts below. Clamped Metallic | Bolted Metallic | Bolted Plastic
Download information from our literature page
specifications
Please select a style for information
Clamped Metallic | Bolted Metallic | Bolted Plastic
e4 performance data
E2 2" DIAPHRAGM PUMP
E2 2" Pumps
Versa-Matic's E2 2" pump uses the Elima-Matic air valve system to provide non-stalling, lube-free performance. It is available in a clamped or bolted design, with some models offering a side discharge feature that allows alternative installation options and interchangeability with a broader range of competitors.
The E2 2" Pump. . .
- is available in either plastic or metal
- avoids blow-by when the pump is online but not in use
- is self-priming and dry running
- provides dimensional interchangeability with Wilden 2" metal pumps
- offers horizontal discharge model on bolted metallic pump
Select a pump type to display the corresponding specifications and performance charts below.
Clamped Metallic | Bolted Metallic | Bolted Aluminium | Flap Valve
Bolted Plastic End Ported | Bolted Plastic Centre Ported
Download information from our literature page
specifications
Please select a style for information
Clamped Metallic | Bolted Metallic | Bolted Aluminium | Flap Valve
Bolted Plastic End Ported | Bolted Plastic Centre Ported
e2 performance data
E3 3" DIAPHRAGM PUMP
E3 3" Pumps
Versa-Matic's E3 3" pump uses the Elima-Matic air valve system to provide non-stalling, lube-free performance. It is available in a clamped or bolted design, with some models offering a side discharge feature for alternative installation options.The E3 3" Pump. . .
- is available in either plastic or metal
- avoids blow-by when the pump is online but not in use
- is self-priming and dry running
- provides dimensional interchangeability with Wilden 3" metal pumps
- offers horizontal discharge model on bolted metallic pump
Select a pump type to display the corresponding specifications and performance charts below.
Clamped Metallic | Bolted Metallic |Bolted Plastic
Download information from our literature page
specifications
Please select a style for information
Clamped Metallic | Bolted Metallic |Bolted Plastic End Ported
e3 performance data
VERSAMATIC PUMP
+더보기
E6 1/4" DIAPHRAGM PUMP
E8 3/8" DIAPHRAGM PUMP
E5 1/2" DIAPHRAGM PUMP
E7 3/4" DIAPHRAGM PUMP
E1 1" DIAPHRAGM PUMP
E4 1-1/2" DIAPHRAGM PUMP
E2 2" DIAPHRAGM PUMP
E3 3" DIAPHRAGM PUMP
YAMADA PUMP
+ 더보기
Yamada® NDP-40 Series Double Diaphragm Pump
NDP-40 Aluminum, ANSI Flange
Dimensions: 16.18" W x 27.91" HNet Weight: 68 lbs. (28.9 kg)
Shipping Weight: 75 lbs.
NDP-40 Cast Iron, NPT
Dimensions: 16.18" W x 27.75" HNet Weight: 112 lbs. (59.8 kg)
Shipping Weight: 120 lbs.
NDP-40 Polypropylene, ANSI Flange
Dimensions: 15.75" W x 29.61" HNet Weight: 70 lbs. (29.9 kg)
Shipping Weight: 78 lbs.
NDP-40 Kynar, ANSI Flange
Dimensions: 15.75" W x 29.61" HNet Weight: 70 lbs. (29.9 kg)
Shipping Weight: 78 lbs.
NDP-40 Stainless Steel, NPT
Dimensions: 16.18" W x 27.75" HNet Weight: 98 lbs. (39.9 kg)
Shipping Weight: 106 lbs.
NDP-40 Stainless Steel, ANSI Flange
Dimensions: 16.18" W x 27.75" HNet Weight: 98 lbs. (39.9 kg)
Shipping Weight: 106 lbs.
prev
next
Yamada® NDP-40 series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 116 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar® (PVDF), groundable acetal, and polypropylene construction.
What separates Yamada from the rest of the pack is our air valve technology. Yamada uses a completely non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side is pulling the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
ACCESSORIES
Air Motor Kit |
K45-AM |
Liquid End Kits |
Aluminum: K40-MC, K40-MN, K40-ME, K40-MH, K40-MS, K40-MV, K40-MT Stainless Steel: K40-MC, K40-MN, K40-ME, K40-MH, K40-MS, K40-MV, K40-MT Cast Iron: K40-MC, K40-MN, K40-ME, K40-MH, K40-MS, K40-MV, K40-MT Polypropylene: K40-PC, K40-PN, K40-PE, K40-PH, K40-PS, K40-PV, K40-PT Kynar: K40-VS-1, K40-VT-1 |
Filter / Regulators |
FR-4 and FR-4A (Auto Drain) |
Dampener |
|
Liquid Level Controller |
|
Controllers |
|
Diaphragm Monitor System |
|
DRy Run Detector |
The Yamada Advantage
Yamada Air Powered Double Diaphragm Pumps: Engineered for High Performance. Manufactured for Long Life.
Rugged, Bolted Construction
All Yamada pumps feature bolted construction, which eliminates leaks and simplifies post-maintenance reassembly. Bolted construction is superior to clamp band retainers, which frequently require frustrating, unnecessary leakage rebuilds from misalignment during reassembly.
Patented Air Valve Technology
Incorporated in every Yamada Air Powered Double Diaphragm pump
Yamada air valve technology is the heart of the air-powered double diaphragm pump and determines reliability. Yamada holds three patents on its field proven valve and enjoys a superior reputation throughout the industry.
Why Specify an AODD Pump?
- Handles a wide variety of fluids with high solids content
- Self priming
- Ability to run dry
- Variable flow rate and discharge pressure
- Portable/simple installation
- Dead head
- Shear sensitive
- Safe operation
- Submersible
- Pumping efficiency remains constant
Contact Us
Literatures & Drawings
Printable Specs
Maintenance Manuals
CAD Drawings
NDP-40 Aluminum (JPG)
NDP-40 Aluminum (DWG)
NDP-40 Aluminum (PDF)
NDP-40 Cast Iron, NPT (JPG)
NDP-40 Cast Iron, NPT (DWG)
NDP-40 Cast Iron, NPT (PDF)
NDP-40 Kynar®, Flange (JPG)
NDP-40 Kynar®, Flange (DWG)
NDP-40 Kynar®, Flange (PDF)
NDP-40 Polypropylene, Flange (JPG)
NDP-40 Polypropylene, Flange (DWG)
NDP-40 Polypropylene, Flange (PDF)
NDP-40 Stainless Steel, Flange (JPG)
NDP-40 Stainless Steel, Flange (DWG)
NDP-40 Stainless Steel, Flange (PDF)
NDP-40 Stainless Steel, NPT (JPG)
NDP-40 Stainless Steel, NPT (DWG)
NDP-40 Stainless Steel, NPT (PDF)
3D CAD Drawings
NDP-40 Aluminum (EPRT)
NDP-40 Cast Iron (EPRT)
NDP-40 Kynar® (EPRT)
NDP-40 Polypropylene (EPRT)
NDP-40 Stainless Steel Flange (EPRT)
NDP-40 Stainless Steel NPT (EPRT)
NDP-40 Aluminum (IGS)
NDP-40 Cast Iron (IGS)
NDP-40 Kynar® (IGS)
NDP-40 Polypropylene (IGS)
NDP-40 Stainless Steel Flange (IGS)
NDP-40 Stainless Steel NPT (IGS)
Performance Curve
Bill of Materials
NDP-40BPC
NDP-40BPN
NDP-40BPE
NDP-40BPH
NDP-40BPS
NDP-40BPV
NDP-40BPT
NDP-40BVS
NDP-40BVT
NDP-40BAC
NDP-40BAN
NDP-40BAE
NDP-40BAH
NDP-40BAS
NDP-40BAV
NDP-40BAT
NDP-40BSC
NDP-40BSN
NDP-40BSE
NDP-40BSH
NDP-40BSS
NDP-40BSV
NDP-40BST
NDP-40BFC
NDP-40BFN
NDP-40BFE
NDP-40BFH
NDP-40BFS
NDP-40BFV
NDP-40BFT
Model Nomenclature
Videos
Yamada® NDP-32 Series Double Diaphragm Pump
NDP-32
11.18" W x 16.87" HNet Weight: 26.5 lbs. (13.0 kg)
Shipping Weight: 28 lbs.
NDP-32 Chart
prev
next
Simplify Your Pump Replacement With a Yamada!
Have you ever wanted to switch out your old pump for a Yamada®, but faced re-piping issues? With the NEW NDP-32 Pump from Yamada, your problems are solved. This new 1-1/2” inlet x 1-1/4” outlet matches up dimensionally with old competing brand’s designs. Now your conversion to Yamada is just a little bit easier.
Yamada® NDP-32 series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 50.2 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar® (PVDF), groundable acetal, and polypropylene construction.
What separates Yamada from the rest of the pack is our air valve technology. Yamada uses a completely non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side is pulling the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
ACCESSORIES
Air Motor Kit |
K32-AM |
Liquid End Kits |
Aluminum: K32-MN, K32-MT |
Filter / Regulators |
FR-3 and FR-3A (Auto Drain) |
Dampener |
|
Liquid Level Controller |
|
Controllers |
|
Diaphragm Monitor System |
|
DRy Run Detector |
The Yamada Advantage
Yamada Air Powered Double Diaphragm Pumps: Engineered for High Performance. Manufactured for Long Life.
Rugged, Bolted Construction
All Yamada pumps feature bolted construction, which eliminates leaks and simplifies post-maintenance reassembly. Bolted construction is superior to clamp band retainers, which frequently require frustrating, unnecessary leakage rebuilds from misalignment during reassembly.
Patented Air Valve Technology
Incorporated in every Yamada Air Powered Double Diaphragm pump
Yamada air valve technology is the heart of the air-powered double diaphragm pump and determines reliability. Yamada holds three patents on its field proven valve and enjoys a superior reputation throughout the industry.
Why Specify an AODD Pump?
- Handles a wide variety of fluids with high solids content
- Self priming
- Ability to run dry
- Variable flow rate and discharge pressure
- Portable/simple installation
- Dead head
- Shear sensitive
- Safe operation
- Submersible
- Pumping efficiency remains constant
Contact Us
Literatures
Printable Specs
Maintenance Manuals
Bill of Materials
Videos
Yamada® NDP-5 Diaphragm Pump Series
NDP-5 POLYPROPYLENE NPT
Dimensions: 6.14" W x 5.79" HNet Weight: 3.0 lbs. (1.36 kg)
Shipping Weight: 4 lbs.
NDP-5 POLYPROPYLENE CENTER PORT
Dimensions: 6.14" W x 5.79" HNet Weight: 3.0 lbs. (1.36 kg)
Shipping Weight: 4 lbs.
NDP-5 METAL NPT
Dimensions: 6.1" W x 5.87" HNet Weight: 5.9 lbs. (2.68 kg)
Ship Weight: 6.9 lbs.
NDP-5 POLYPROPYLENE SPLIT MANIFOLD
Dimensions: 6.6" W x 5.87" HNet Weight: 3.0 lbs. (1.36 kg)
Ship Weight: 4 lbs.
prev
next
Yamada® NDP-5 series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 3.4 gallons per minute. Pumps are available in aluminum, stainless steel(316), Kynar®(PVDF), groundable acetal, and polypropylene construction.
What separates Yamada from the rest of the pack is our air valve technology. Yamada uses a completely non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side is pulling the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
GENERAL PUMP INFORMATION
| 3.4 Gallons/Minute Max. | |
| 1/4" NPT Fluid Port |
| Intake & Discharge Connection | 1/4" Female NPT |
| Air Inlet | 1/4" Female NPT (includes ball valve) |
| Air Exhaust | 3/8" Female NPT (includes silencer) |
| Air Supply Pressure (All Models) | 20 to 100 PSI (1.4 to 7 kgf/cm2) |
| Discharge Volume Per Cycle | 0.0085 gallons (35 cc) |
| Maximum Cycles Per Minute | All diaphragms: 400 |
| Maximum Dry Suction Lift | 5-feet |
| Air Motor | Standard: Ryton® Air Motor |
Maximum Liquid Temperature Fitted with PTFE diaphragm
| Groundable Acetal 180F (82C) |
| Polypropylene (PPG) 180F (82C) |
| Kynar® (PVDF) 212F (100C) |
| Aluminum (ADC-12) 212F (100C) |
| Stainless Steel (316) 212F (100C) |
MATERIAL TYPE
:: Aluminum |
|
| Dimensions: | 6.1" W x 5.87" H |
| Net Weight: | 3.3 lbs. (1.5 kg) |
| Shipping Weight: | 4.3 lbs. |
:: Kynar® (PVDF) |
|
| Dimensions: | 6.14" W x 5.79" H |
| Net Weight: | 3.7 lbs. (1.67 kg) |
| Shipping Weight: | 4.7 lbs. |
:: Groundable Acetal |
|
| Dimensions: | 6.14" W x 5.79" H |
| Net Weight: | 3.7 lbs. (1.67 kg) |
| Shipping Weight: | 4.7 lbs. |
:: Stainless Steel |
|
| Dimensions: | 6.1" W x 5.87" H |
| Net Weight: | 5.9 lbs. (2.68 kg) |
| Shipping Weight: | 6.9 lbs. |
:: Polypropylene |
|
| Dimensions: | 6.14" W x 5.79" H |
| Net Weight: | 3.0 lbs. (1.36 kg) |
| Shipping Weight: | 4 lbs. |
ACCESSORIES
Air Motor Kit |
K5-AM |
Liquid End Kits |
|
| Aluminum: | K5-MT |
| Kynar: | K5-VT-2 |
| Groundable Acetal: | K5-DT |
| Stainless Steel: | K5-MT |
| Polypropylene: | K5-PT |
Filter / Regulators |
|
Dampener |
|
Liquid Level Controller |
|
Controllers |
|
Diaphragm Monitor System |
|
DRy Run Detector |
The Yamada Advantage
Yamada Air Powered Double Diaphragm Pumps: Engineered for High Performance. Manufactured for Long Life.
Rugged, Bolted Construction
All Yamada pumps feature bolted construction, which eliminates leaks and simplifies post-maintenance reassembly. Bolted construction is superior to clamp band retainers, which frequently require frustrating, unnecessary leakage rebuilds from misalignment during reassembly.
Patented Air Valve Technology
Incorporated in every Yamada Air Powered Double Diaphragm pump
Yamada air valve technology is the heart of the air-powered double diaphragm pump and determines reliability. Yamada holds three patents on its field proven valve and enjoys a superior reputation throughout the industry.
Why Specify an AODD Pump?
- Handles a wide variety of fluids with high solids content
- Self priming
- Ability to run dry
- Variable flow rate and discharge pressure
- Portable/simple installation
- Dead head
- Shear sensitive
- Safe operation
- Submersible
- Pumping efficiency remains constant
Contact Us
Literatures & Drawings
Printable Specs
Maintenance Manuals
CAD Drawings
3D CAD Drawings
NDP-5 Aluminum (EPRT)
NDP-5 Polypropylene NPT (EPRT)
NDP-5 Aluminum (IGS)
NDP-5 Polypropylene NPT (IGS)
Performance Curve
Bill of Materials
Model Nomenclature
Videos
Yamada® DP-10/DP-15 Diaphragm Pump Series
DP-10 Polypropylene
Dimensions: 7.72" W x 7.72" HNet Weight: 6.8 lbs. (3.1 kg)
Shipping Weight: 8.8 lbs.
DP-10 Metal
Dimensions: 7.32" W × 9.49" HNet Weight: 11.7 lbs. (5.3 kg)
Ship Weight: 13.7 lbs.
DP-15 Polypropylene
Dimensions: 9.68" W x 11.69" HNet Weight: 9.0 lbs. (4.0 kg)
Shipping Weight: 12 lbs.
DP-15 Groundable Acetal
Dimensions: 9.68" W x 11.69" HNet Weight: 9.0 lbs. (4.0 kg)
Shipping Weight: 12 lbs.
/DP-15-Aluminum.jpg)
DP-15-Aluminum
Dimensions: 7.64" W x 10.4" HNet Weight: 12.0 lbs. (4.0 kg)
Shipping Weight: 15 lbs.
Yamada® DP-10/DP-15 series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 6 gallons per minute (DP-10) or 8-15 gallons per minute (DP-15).
DP-10 pumps are available in aluminum, stainless steel (316), and polypropylene, DP-15 pumps are available in either polypropylene, aluminum or groundable acetal. A wide selection of diaphragm materials cover a variety of applications.
What separates Yamada from the rest of the pack is our air valve technology. Yamada uses a completely non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side is pulling the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
GENERAL PUMP INFORMATION
| 6 Gallons/Minute (DP-10) | |
| 3/8" NPT Fluid Port | |
| 7.4-15 Gallons/Minute (DP-15) | |
| 1/2" NPT Fluid Port |
Intake & Discharge Connections
| DP-10 | |
| Polypropylene (PPG) | 3/8" Female NPT |
| Aluminum (ADC-12) | 3/8" Female NPT |
| Stainless Steel (316) | 3/8" Female NPT |
| DP-15 | |
| Polypropylene (PPG) | 1/2" Female NPT |
| Aluminum (ADC-12) | 1/2" Female NPT |
| Groundable Acetal | 1/2" Female NPT |
| Air Inlet | 1/4" Female NPT (includes ball valve) |
| Air Exhaust | 3/8" Female NPT (includes silencer) |
Maximum Liquid Temperature1
| Buna N 180°F (82°C) |
| Neoprene 180°F (82°C) |
| Santoprene®(TPO) 180°F (82°C) |
| EPDM 212°F (100°C) |
| PTFE 212°F (100°C) |
| Hytrel® (TPE) 248°F (120°C) |
| Viton® fluoroelastomer 248°F (120°C) |
| 1Polypropylene and acetal pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material. |
| Air Supply Pressure (All Models) | 20 to 100 PSI (1.4 to 7 kgf/cm²) |
| Discharge Volume Per Cycle | DP-10: 0.020 gallons (74 cc) DP-15: 0.027 gallons (102 cc) DP-15 Metal: 0.042 gallons |
| Maximum Cycles Per Minute | All diaphragms: 300 |
| Maximum Size Solid | 1/32" (1mm) |
| Maximum Dry Suction Lift | All diaphragms 10 feet |
| Air Motor | Standard: aluminum |
MATERIAL TYPES
:: Aluminum (DP-10) |
|
| Dimensions: | 7.32" W × 9.49" H |
| Net Weight: | 7.9 lbs. (3.6 kg) |
| Shipping Weight: | 9.9 lbs. |
:: Aluminum (DP-15) |
|
| Dimensions: | 7.64" W x 10.4" H |
| Net Weight: | 12.0 lbs. (4.0 kg) |
| Shipping Weight: | 15 lbs. |
:: Polypropylene (DP-10) |
|
| Dimensions: | 7.72" W x 7.72" H |
| Net Weight: | 6.8 lbs. (3.1 kg) |
| Shipping Weight: | 8.8 lbs. |
:: Polypropylene (DP-15) |
|
| Dimensions: | 9.68" W x 11.69" H |
| Net Weight: | 9.0 lbs. (4.0 kg) |
| Shipping Weight: | 12 lbs. |
:: Stainless Steel (DP-10) |
|
| Dimensions: | 7.32" W × 9.49" H |
| Net Weight: | 11.7 lbs. (5.3 kg) |
| Shipping Weight: | 13.7 lbs. |
:: Groundable Acetal (DP-15) |
|
| Dimensions: | 9.68" W x 11.69" H |
| Net Weight: | 9.0 lbs. (4.0 kg) |
| Shipping Weight: | 12 lbs. |
ACCESSORIES
Air Motor Kit |
K115-AM |
Liquid End Kits |
|
| DP-10 Aluminum: | K10-AC, K10-AN, K10-AH, K10-AS, K10-AT |
| DP-10 Stainless Steel: | K10-SC, K10-SN, K10-SH, K10-SS, K10-ST |
| DP-10 Polypropylene: | K10-PC, K10-PN, K10-PH, K10-PS, K10-PT |
| DP-15 Aluminum: | K15-AN, K15-AS, K15-AT |
| DP-15 Polypropylene-Ball Valve: | K15-PH-B, K15-PN-B, K15-PS-B, K15-PT-B |
| DP-15 Polpypropylene-Flat Valve: | K15-PH, K15-PN, K15-PS, K15-PT |
Filter / Regulators |
FR-1, FR-1A (Auto Drain) FRL-2, and FRL-2A (L=Lubricator) |
Dampener |
|
Liquid Level Controller |
|
Controllers |
|
Diaphragm Monitor System |
|
DRy Run Detector |
The Yamada Advantage
Yamada Air Powered Double Diaphragm Pumps: Engineered for High Performance. Manufactured for Long Life.
Rugged, Bolted Construction
All Yamada pumps feature bolted construction, which eliminates leaks and simplifies post-maintenance reassembly. Bolted construction is superior to clamp band retainers, which frequently require frustrating, unnecessary leakage rebuilds from misalignment during reassembly.
Patented Air Valve Technology
Incorporated in every Yamada Air Powered Double Diaphragm pump
Yamada air valve technology is the heart of the air-powered double diaphragm pump and determines reliability. Yamada holds three patents on its field proven valve and enjoys a superior reputation throughout the industry.
Why Specify an AODD Pump?
- Handles a wide variety of fluids with high solids content
- Self priming
- Ability to run dry
- Variable flow rate and discharge pressure
- Portable/simple installation
- Dead head
- Shear sensitive
- Safe operation
- Submersible
- Pumping efficiency remains constant
Contact Us
Literatures & Drawings
Literatures
Printable Specs
Maintenance Manuals
CAD Drawings
3D CAD Drawings
DP-10 Aluminum (EPRT)
DP-10 Stainless Steel (EPRT)
DP-10 Polypropylene (EPRT)
DP-15 Polypropylene/Acetal (EPRT)
DP-10 Aluminum (IGS)
DP-10 Stainless Steel (IGS)
DP-10 Polypropylene (IGS)
DP-15 Polypropylene/Acetal (IGS)
Performance Curve
DP-10 Performance Curve
DP-15 Performance Curve
DP-15BAN Performance Curve
DP-15BAT Performance Curve
Bill of Materials
DP-10BAC
DP-10BAH
DP-10BAN
DP-10BAS
DP-10BAT
DP-10BPC
DP-10BPH
DP-10BPN
DP-10BPS
DP-10BPT
DP-10BSC
DP-10BSH
DP-10BSN
DP-10BSS
DP-10BST
DP-15BPH
DP-15BPN
DP-15BPS
DP-15BPT
DP-15FDT
DP-15FPH
DP-15FPN
DP-15FPS
DP-15FPT
DP-15BAN
DP-15BAS
DP-15BAT
Model Nomenclature
Videos
Yamada® NDP-15 Diaphragm Pump Series
Yamada® NDP-15 Diaphragm Pump Series
NDP-15 Kynar NPT
Dimensions: 8.66" W x 11.73" HNet Weight: 9.4 lbs. (4.2 kg)
Shipping Weight: 11 lbs.
NDP-15 Acetal NPT
Dimensions: 8.66" W x 11.73" HNet Weight: 9 lbs. (4 kg)
Shipping Weight: 11 lbs.
NDP-15 Polypropylene NPT
Dimensions: 8.66" W x 11.73" HNet Weight: 7.7 lbs. (3.5 kg)
Shipping Weight: 9.5 lbs.
NDP-15 Metal, NPT
Dimensions: 8.66" W x 10.71" HNet Weight: 9 lbs. (4 kg)
Shipping Weight: 11 lbs.
NDP-15 Split Manifold
Dimensions: 8.66" W x 11.73" HNet Weight: 7.7 lbs. (3.5 kg)
Shipping Weight: 9.5 lbs.
prev
next
Yamada® NDP-15 series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 13.5 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar® (PVDF), groundable acetal, and polypropylene construction, with a wide variety of diaphragm materials.
What separates Yamada from the rest of the pack is our air valve technology. Yamada uses a completely non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side is pulling the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
GENERAL PUMP INFORMATION
| 13.5 Gallons/Minute | |
| 1/2" NPT Fluid Port |
Intake & Discharge Connections
| Polypropylene (PPG)1 | 1/2" Female NPT |
| Kynar® (PVDF)2 | 1/2" Female NPT |
| Groundable Acetal2 | 1/2" Female NPT |
| Aluminum (ADC-12)3 | 1/2" Female NPT |
| Stainless Steel (316)3 | 1/2" Female NPT |
| Air Inlet | 1/4" Female NPT (includes ball valve) |
| Air Exhaust | 3/8" Female NPT (includes silencer) |
| 1Polypropylene pumps may be fitted with ball or flat check valves. Ball-type check valves are recommended for flooded suction applications. Flat-type check valves are recommended for suction lift applications. 2Kynar® and Groundable Acetal pumps are fitted with flat check valves only. 3Aluminum and Stainless Steel pumps are fitted with ball check valves only. |
|
Maximum Liquid Temperature1
| Buna N 180°F (82°C) |
| Neoprene 180°F (82°C) |
| Santoprene®(TPO) 180°F (82°C) |
| EPDM 212°F (100°C) |
| PTFE 212°F (100°C) |
| Hytrel® (TPE) 248°F (120°C) |
| Viton® fluoroelastomer 248°F (120°C) |
| 1Polypropylene and acetal pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material. |
| Air Supply Pressure (All Models) | 20 to 100 PSI (1.4 to 7 kgf/cm²) |
| Discharge Volume Per Cycle | 0.034 gallons (128 cc) |
| Maximum Cycles Per Minute | 400 |
| Maximum Size Solid | 1/32" (1mm) |
| Maximum Dry Suction Lift | Flat-type check valve: 8-feet Ball-type check valve: 5-feet |
| Air Motor | Ryton® air motor standard |
| Other Options | Split manifold pumps |
MATERIAL TYPES
:: Aluminum |
|
| Dimensions: | 8.66" W x 10.71" H |
| Net Weight: | 9 lbs. (4 kg) |
| Shipping Weight: | 11 lbs. |
:: Kynar® (PVDF) |
|
| Dimensions: | 8.66" W x 11.73" H |
| Net Weight: | 9.4 lbs. (4.2 kg) |
| Shipping Weight: | 11 lbs. |
:: Groundable Acetal |
|
| Dimensions: | 8.66" W x 11.73" H |
| Net Weight: | 9 lbs. (4 kg) |
| Shipping Weight: | 11 lbs. |
:: Polypropylene (NPT) |
|
| Dimensions: | 8.66" W x 11.73" H |
| Net Weight: | 7.7 lbs. (3.5 kg) |
| Shipping Weight: | 9.5 lbs. |
:: Polypropylene (Center Port) |
|
| Dimensions: | 8.66" W x 11.73" H |
| Net Weight: | 7.7 lbs. (3.5 kg) |
| Shipping Weight: | 9.5 lbs. |
:: Stainless Steel |
|
| Dimensions: | 8.31" W x 9.7" H |
| Net Weight: | 13.6 lbs. (6.16 kg) |
| Shipping Weight: | 15.5 lbs. |
ACCESSORIES
Air Motor Kit |
K15-AM |
Liquid End Kits |
Aluminum: K15-MC, K15-MN, K15-MH, K15-MS, K15-MT Stainless Steel: K15-MC, K15-MN, K15-MH, K15-MS, K15-MT Polypropylene-Ball Valve: K15-PC-B, K15-PN-B, K15-PH-B, K15-PS-B, K15-PT-B Polypropylene-Flat Valve: K15-PC, K15-PN, K15-PH, K15-PS, K15-PT Kynar: K15-VH-1, K15-VS, K15-VT |
Filter / Regulators |
FR-1 and FR-1A (Auto Drain) |
Dampener |
|
Liquid Level Controller |
|
Controllers |
|
Diaphragm Monitor System |
|
DRy Run Detector |
The Yamada Advantage
Yamada Air Powered Double Diaphragm Pumps: Engineered for High Performance. Manufactured for Long Life.
Rugged, Bolted Construction
All Yamada pumps feature bolted construction, which eliminates leaks and simplifies post-maintenance reassembly. Bolted construction is superior to clamp band retainers, which frequently require frustrating, unnecessary leakage rebuilds from misalignment during reassembly.
Patented Air Valve Technology
Incorporated in every Yamada Air Powered Double Diaphragm pump
Yamada air valve technology is the heart of the air-powered double diaphragm pump and determines reliability. Yamada holds three patents on its field proven valve and enjoys a superior reputation throughout the industry.
Why Specify an AODD Pump?
- Handles a wide variety of fluids with high solids content
- Self priming
- Ability to run dry
- Variable flow rate and discharge pressure
- Portable/simple installation
- Dead head
- Shear sensitive
- Safe operation
- Submersible
- Pumping efficiency remains constant
Contact Us
Literatures & Drawings
Printable Specs
Maintenance Manuals
CAD Drawings
3D CAD Drawings
NDP-15 Aluminum (EPRT)
NDP-15 Stainless Steel NPT (EPRT)
NDP-15 Polypropylene NPT (EPRT)
NDP-15 Aluminum (IGS)
NDP-15 Stainless Steel NPT (IGS)
NDP-15 Polypropylene NPT (IGS)
Performance Curve
Bill of Materials
NDP-15BAC
NDP-15BAH
NDP-15BAN
NDP-15BAS
NDP-15BAT
NDP-15BPC
NDP-15BPH
NDP-15BPN
NDP-15BPS
NDP-15BPT
NDP-15BSC
NDP-15BSH
NDP-15BSN
NDP-15BSS
NDP-15BST
NDP-15FPC
NDP-15FPH
NDP-15FPN
NDP-15FPS
NDP-15FPT
NDP-15FDT
NDP-15FVH
NDP-15FVS
NDP-15FVT
Model Nomenclature
Videos
Yamada® NDP-20 Diaphragm Pump Series
NDP-20 Polypropylene, ANSI Flange
12.44" W x 14.75" HNet Weight: 17.6 lbs. (8.2 kg)
Shipping Weight: 22.6 lbs.
NDP-20 Polypropylene, NPT
12.44" W x 14.50" HNet Weight: 17.6 lbs. (8.2 kg)
Shipping Weight: 22.6 lbs.
NDP-20 Metal, NPT
Dimensions: 9.80" W x 12.60" HNet Weight: 19.8 lbs. (9.0 kg)
Shipping Weight: 23 lbs.
NDP-20 Metal w/Poly Air Motor
Dimensions: 9.80" W x 12.60" HNet Weight: 30.8 lbs. (13.9 kg)
Shipping Weight: 32 lbs.
NDP-20-PP Polypropylene, NPT
12.44" W x 14.50" HNet Weight: 17.6 lbs. (8.2 kg)
Shipping Weight: 22.6 lbs.
prev
next
Yamada® NDP-20 series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 28 gallons per minute. Pumps are available in aluminum, stainless steel (316), and polypropylene construction, with a wide variety of diaphragm materials.
Unified Air Valve Concept – 2 common size air valve assemblies used for 6 sizes of pumps
Reducing reassembly confusion and parts inventory
Truly No-Lubricated Air Valve – patented air valve on all NDP series pumps
Never requires lubrication or pre-packing
Non-Stalling – patented non-centering, 304SS spring-assisted shifter, ensuring a positive shift every time
Tested to last over 300 million cycles
Aides in long dead head application for reliable startup
What separates Yamada from the rest of the pack is our air valve technology. Yamada uses a completely non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side is pulling the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
GENERAL PUMP INFORMATION
| 31.7 Gallons/Minute | |
| 3/4" NPT Fluid Port |
Intake & Discharge Connections
| Polypropylene (PPG) |
3/4" Female NPT or 3/4" ANSI Flange B16.5 #150 |
| Aluminum (ADC-12) |
3/4" Female NPT |
| Stainless Steel (316) |
3/4" Female NPT |
| Air Inlet | 3/8" Female NPT (includes ball valve) |
| Air Exhaust | 3/4" Female NPT (includes silencer) |
Maximum Liquid Temperature1
| Buna N 180°F (82°C) |
| Neoprene 180°F (82°C) |
| Santoprene®(TPO) 180°F (82°C) |
| EPDM 212°F (100°C) |
| PTFE 212°F (100°C) |
| Hytrel® (TPE) 248°F (120°C) |
| Viton® fluoroelastomer 248°F (120°C) |
| 1Polypropylene and acetal pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material. |
| Air Supply Pressure (All Models) | 20 to 100 PSI (1.4 to 7 kgf/cm²) |
| Discharge Volume Per Cycle |
Rubber diaphragm: 0.163 gallons (615 cc) |
| Maximum Cycles Per Minute |
Rubber diaphragm: 195 |
| Maximum Size Solid | 1/16" (2.0 mm) |
| Maximum Dry Suction Lift | Rubber-fitted pump capability: 18-feet |
| Air Motor | Standard: Aluminum |
| Optional Coating | PTFE-coated |
| Other Options | Split manifold pumps |
MATERIAL TYPES
:: Aluminum |
|
| Dimensions: | 9.80" W x 12.60" H |
| Net Weight: | 19.8 lbs. (9.0 kg) |
| Shipping Weight: | 23 lbs. |
:: Polypropylene (ANSI flange) |
|
| Dimensions: | 12.44" W x 14.75" H |
| Net Weight: | 17.6 lbs. (8.2 kg) |
| Shipping Weight: | 22.6 lbs. |
:: Polypropylene (NPT) |
|
| Dimensions: | 12.44" W x 14.50" H |
| Net Weight: | 17.6 lbs. (8.2 kg) |
| Shipping Weight: | 22.6 lbs. |
:: Stainless Steel |
|
| Dimensions: | 9.80" W x 12.60" H |
| Net Weight: | 30.8 lbs. (13.9 kg) |
| Shipping Weight: | 32 lbs. |
ACCESSORIES
Air Motor Kit |
K225-AM (metal center body) and K225-AP (plastic center body) |
Liquid End Kits |
Aluminum: K20-MC-1, K20-MN-1, K20-ME-1, K20-MH-1, K20-MS-1, K20-MV-1, K20-MT-1 Stainless Steel: K20-MC-1, K20-MN-1, K20-ME-1, K20-MH-1, K20-MS-1, K20-MV-1, K20-MT-1 Polypropylene: K20-PC-PP, K20-PN-PP, K20-PE-PP, K20-PH-PP, K20-PS-PP, K20-PV-PP, K20-PT-PP |
Filter / Regulators |
|
Dampener |
|
Liquid Level Controller |
|
Controllers |
|
Diaphragm Monitor System |
|
DRy Run Detector |
The Yamada Advantage
Yamada Air Powered Double Diaphragm Pumps: Engineered for High Performance. Manufactured for Long Life.
Rugged, Bolted Construction
All Yamada pumps feature bolted construction, which eliminates leaks and simplifies post-maintenance reassembly. Bolted construction is superior to clamp band retainers, which frequently require frustrating, unnecessary leakage rebuilds from misalignment during reassembly.
Patented Air Valve Technology
Incorporated in every Yamada Air Powered Double Diaphragm pump
Yamada air valve technology is the heart of the air-powered double diaphragm pump and determines reliability. Yamada holds three patents on its field proven valve and enjoys a superior reputation throughout the industry.
Why Specify an AODD Pump?
- Handles a wide variety of fluids with high solids content
- Self priming
- Ability to run dry
- Variable flow rate and discharge pressure
- Portable/simple installation
- Dead head
- Shear sensitive
- Safe operation
- Submersible
- Pumping efficiency remains constant
Contact Us
Literatures & Drawings
Printable Specs
Maintenance Manuals
CAD Drawings
NDP-20 Aluminum NPT (JPG)
NDP-20 Aluminum NPT (DWG)
NDP-20 Aluminum NPT (PDF)
NDP-20 Aluminum 1S NPT (JPG)
NDP-20 Aluminum 1S NPT (DWG)
NDP-20 Aluminum 1S NPT (PDF)
NDP-20 Aluminum Drum NPT (JPG)
NDP-20 Aluminum Drum NPT (DWG)
NDP-20 Aluminum Drum NPT (PDF)
NDP-20 Polypropylene, Flange (JPG)
NDP-20 Polypropylene, Flange (DWG)
NDP-20 Polypropylene, Flange (PDF)
NDP-20 Polypropylene, NPT (JPG)
NDP-20 Polypropylene, NPT (DWG)
NDP-20 Polypropylene, NPT (PDF)
NDP-20-PP Polypropylene, NPT (JPG)
NDP-20-PP Polypropylene, NPT (DWG)
NDP-20-PP Polypropylene, NPT (PDF)
NDP-20 Stainless Steel, NPT (JPG)
NDP-20 Stainless Steel, NPT (DWG)
NDP-20 Stainless Steel, NPT (PDF)
3D CAD Drawings
NDP-20 Aluminum (EPRT)
NDP-20 Stainless Steel NPT (EPRT)
NDP-20 Polypropylene Flange (EPRT)
NDP-20 Polypropylene NPT (EPRT)
NDP-20 Aluminum (IGS)
NDP-20 Stainless Steel NPT (IGS)
NDP-20 Polypropylene Flange (IGS)
NDP-20 Polypropylene NPT (IGS)
Performance Curve
Bill of Materials
NDP-20BAV
NDP-20BAT
NDP-20BAS
NDP-20BAN
NDP-20BAN-1S
NDP-20BAH
NDP-20BAE
NDP-20BAC
NDP-20BPC-PP
NDP-20BPC
NDP-20BPE-PP
NDP-20BPE
NDP-20BPH-PP
NDP-20BPH
NDP-20BPN-PP
NDP-20BPN
NDP-20BPS-PP
NDP-20BPS
NDP-20BPT-PP
NDP-20BPT
NDP-20BPV-PP
NDP-20BPV
NDP-20BSC
NDP-20BSE
NDP-20BSH
NDP-20BSN
NDP-20BSS
NDP-20BST
NDP-20BSV
Videos
Yamada® NDP-25 Series Double Diaphragm Pump
NDP-25 Polypropylene ANSI Flange
14.40" W x 17.40" HNet Weight: 29 lbs. (10.9 kg)
Shipping Weight: 30 lbs.
NDP-25 Polypropylene NPT
14.40" W x 16.90" HNet Weight: 29 lbs. (10.9 kg)
Shipping Weight: 30 lbs.
NDP-25 Kynar, ANSI Flange
14.40" W x 17.40" HNet Weight: 29.7 lbs. (13.4 kg)
Shipping Weight: 33 lbs.
NDP-25 Kynar, NPT
14.40" W x 16.90" HNet Weight: 29.7 lbs. (13.4 kg)
Shipping Weight: 33 lbs.
NDP-25 Metal, NPT
Dimensions: 11.30" W x 15.08" HNet Weight: 43 lbs. (19.9 kg)
Shipping Weight: 46 lbs.
NDP-25 Metal, PP
Dimensions: 11.30" W x 15.08" HNet Weight: 43 lbs. (19.9 kg)
Shipping Weight: 46 lbs.
prev
next
Yamada® NDP-25 series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 49 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar® (PVDF), groundable acetal, and polypropylene construction.
Unified Air Valve Concept – 2 common size air valve assemblies used for 6 sizes of pumps reducing reassembly confusion and parts inventory
Truly No-Lubricated Air Valve – patented air valve on all NDP series pumps never requires lubrication or pre-packing
Non-Stalling – patented non-centering, 304SS spring-assisted shifter, ensuring a positive shift every time
Tested to last over 300 million cycles
Aides in long dead head application for reliable startup
What separates Yamada from the rest of the pack is our air valve technology. Yamada uses a completely non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side is pulling the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
GENERAL PUMP INFORMATION
| 46.2 Gallons/Minute | |
| 1" Fluid Port (NPT or ANSI Flange) |
Intake & Discharge Connections
| Polypropylene (PPG) |
1" Female NPT or 1" ANSI Flange B16.5 #150 |
| Kynar® (PVDF) | 1" Female NPT or 1" ANSI Flange B16.5 #150 |
| Aluminum (ADC-12) | 1" Female NPT |
| Cast Iron | 1" Female NPT |
| Air Inlet | 3/8" Female NPT (includes ball valve) |
| Air Exhaust | 3/4" Female NPT (includes silencer) |
Maximum Liquid Temperature1
| Buna N 180°F (82°C) |
| Neoprene 180°F (82°C) |
| Santoprene®(TPO) 180°F (82°C) |
| EPDM 212°F (100°C) |
| PTFE 212°F (100°C) |
| Hytrel® (TPE) 248°F (120°C) |
| Viton® fluoroelastomer 248°F (120°C) |
| *Polypropylene and acetal pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material. Kynar® pumps have a maximum temperature of 248°F (120°C) when fitted with Hytrel® or Viton® diaphragms. |
| Air Supply Pressure (All Models) | 20 to 100 PSI (1.4 to 7 kgf/cm²) |
| Discharge Volume Per Cycle |
Rubber diaphragm: 0.23 gallons (862 cc) |
| Maximum Cycles Per Minute |
Rubber diaphragm: 210 |
| Maximum Size Solid | 3/16" (4.8 mm) |
| Maximum Dry Suction Lift | Rubber-fitted pump capability: 18-feet |
| Air Motor | Standard: Aluminum |
| Optional Coating | PTFE-coated |
MATERIAL TYPES
:: Aluminum |
|
| Dimensions: | 11.30" W x 15.08" H |
| Net Weight: | 27 lbs. (13.0 kg) |
| Shipping Weight: | 31 lbs. |
:: Polypropylene (ANSI flange) |
|
| Dimensions: | 14.40" W x 17.40" H |
| Net Weight: | 29 lbs. (10.9 kg) |
| Shipping Weight: | 30 lbs. |
:: Polypropylene (NPT) |
|
| Dimensions: | 14.40" W x 16.90" H |
| Net Weight: | 29 lbs. (10.9 kg) |
| Shipping Weight: | 30 lbs. |
:: Kynar® (PVDF) (ANSI flange) |
|
| Dimensions: | 14.40" W x 17.40" H |
| Net Weight: | 29.7 lbs. (13.4 kg) |
| Shipping Weight: | 33 lbs. |
:: Kynar® (PVDF) (NPT) |
|
| Dimensions: | 14.40" W x 16.90" H |
| Net Weight: | 29.7 lbs. (13.4 kg) |
| Shipping Weight: | 33 lbs. |
:: Cast Iron |
|
| Dimensions: | 11.30" W x 15.08" H |
| Net Weight: | 43 lbs. (19.9 kg) |
| Shipping Weight: | 46 lbs. |
:: Stainless Steel |
|
| Dimensions: | 11.30" W x 15.08" H |
| Net Weight: | 43 lbs. (19.9 kg) |
| Shipping Weight: | 46 lbs. |
ACCESSORIES
Air Motor Kit |
K225-AM (metal center body) and K225-AP (plastic center body) |
Liquid End Kits |
Aluminum: K25-MC-1, K25-MN-1, K25-ME-1, K25-MH-1, K25-MS-1, K25-MV-1, K25-MT-1 Stainless Steel: K25-MC-1, K25-MN-1, K25-ME-1, K25-MH-1, K25-MS-1, K25-MV-1, K25-MT-1 Cast Iron: K25-MC-1, K25-MN-1, K25-ME-1, K25-MH-1, K25-MS-1, K25-MV-1, K25-MT-1 Polypropylene: K25-PC-PP, K25-PN-PP, K25-PE-PP, K25-PH-PP, K25-PS-PP, K25-PV-PP, K25-PT-PP Kynar: K25-VE-PP, K25-VH-PP, K25-VS-PP, K25-VV-PP, K25-VT-PP |
Filter / Regulators |
FR-3 and FR-3A (Auto Drain) |
Dampener |
|
Liquid Level Controller |
|
Controllers |
|
Diaphragm Monitor System |
|
DRy Run Detector |
The Yamada Advantage
Yamada Air Powered Double Diaphragm Pumps: Engineered for High Performance. Manufactured for Long Life.
Rugged, Bolted Construction
All Yamada pumps feature bolted construction, which eliminates leaks and simplifies post-maintenance reassembly. Bolted construction is superior to clamp band retainers, which frequently require frustrating, unnecessary leakage rebuilds from misalignment during reassembly.
Patented Air Valve Technology
Incorporated in every Yamada Air Powered Double Diaphragm pump
Yamada air valve technology is the heart of the air-powered double diaphragm pump and determines reliability. Yamada holds three patents on its field proven valve and enjoys a superior reputation throughout the industry.
Why Specify an AODD Pump?
- Handles a wide variety of fluids with high solids content
- Self priming
- Ability to run dry
- Variable flow rate and discharge pressure
- Portable/simple installation
- Dead head
- Shear sensitive
- Safe operation
- Submersible
- Pumping efficiency remains constant
Contact Us
Literatures & Drawings
Printable Specs
Maintenance Manuals
CAD Drawings
NDP-25 Aluminum NPT (JPG)
NDP-25 Aluminum NPT (DWG)
NDP-25 Aluminum NPT (PDF)
NDP-25 Cast Iron (JPG)
NDP-25 Cast Iron (DWG)
NDP-25 Cast Iron (PDF)
NDP-25 Stainless Steel, NPT (JPG)
NDP-25 Stainless Steel, NPT (DWG)
NDP-25 Stainless Steel, NPT (PDF)
NDP-25 Kynar®, Flange (JPG)
NDP-25 Kynar®, Flange (DWG)
NDP-25 Kynar®, Flange (PDF)
NDP-25 Kynar®, NPT (JPG)
NDP-25 Kynar®, NPT (DWG)
NDP-25 Kynar®, NPT (PDF)
NDP-25BP-PP Poly, Flange (JPG)
NDP-25BP-PP Poly, Flange (DWG)
NDP-25BP-PP Poly, Flange (PDF)
NDP-25BV-PP Poly, Flange (JPG)
NDP-25BV-PP Poly, Flange (DWG)
NDP-25BV-PP Poly, Flange (PDF)
NDP-25 Polypropylene, Flange (JPG)
NDP-25 Polypropylene, Flange (DWG)
NDP-25 Polypropylene, Flange (PDF)
NDP-25 Polypropylene, NPT (JPG)
NDP-25 Polypropylene, NPT (DWG)
NDP-25 Polypropylene, NPT (PDF)
3D CAD Drawings
NDP-25 Aluminum (EPRT)
NDP-25 Cast Iron (EPRT)
NDP-25 Stainless Steel NPT (EPRT)
NDP-25 Kynar® Flange (EPRT)
NDP-25 Kynar® NPT (EPRT)
NDP-25 Polypropylene Flange (EPRT)
NDP-25 Polypropylene NPT (EPRT)
NDP-25 Aluminum (IGS)
NDP-25 Cast Iron (IGS)
NDP-25 Stainless Steel NPT (IGS)
NDP-25 Kynar® Flange (IGS)
NDP-25 Kynar® NPT (IGS)
NDP-25 Polypropylene Flange (IGS)
NDP-25 Polypropylene NPT (IGS)
Performance Curve
Bill of Materials
NDP-25BAC
NDP-25BAE
NDP-25BAH
NDP-25BAN
NDP-25BAS
NDP-25BAT
NDP-25BAV
NDP-25BFC
NDP-25BFE
NDP-25BFH
NDP-25BFN
NDP-25BFS
NDP-25BFT
NDP-25BFV
NDP-25BPC
NDP-25BPE
NDP-25BPH
NDP-25BPN
NDP-25BPS
NDP-25BPT
NDP-25BPV
NDP-25BPC-PP
NDP-25BPE-PP
NDP-25BPH-PP
NDP-25BPN-PP
NDP-25BPS-PP
NDP-25BPT-PP
NDP-25BPV-PP
NDP-25BSC
NDP-25BSE
NDP-25BSH
NDP-25BSN
NDP-25BSS
NDP-25BST
NDP-25BSV
NDP-25BVE
NDP-25BVH
NDP-25BVS
NDP-25BVT
NDP-25BVV
NDP-25BVE-PP
NDP-25BVH-PP
NDP-25BVS-PP
NDP-25BVT-PP
NDP-25BVV-PP
NDP-25BAC-PP
NDP-25BAN-PP
NDP-25BAE-PP
NDP-25BAV-PP
NDP-25BAT-PP
NDP-25BAH-PP
NDP-25BAS-PP
NDP-25BSS-PP
Model Nomenclature
Videos
YAMADA - NDP-50
NDP-50 Aluminum, ANSI Flange
Dimensions: 17.68" W x 30.67" HNet Weight: 88 lbs. (39.9 kg)
Shipping Weight: 99 lbs.
NDP-50 Cast Iron, ANSI Flange
Dimensions: 17.72" W x 30.55" HNet Weight: 159 lbs. (72.1 kg)
Shipping Weight: 168 lbs.
NDP-50 Cast Iron, NPT
Dimensions: 17.72" W x 30.55" HNet Weight: 159 lbs. (72.1 kg)
Shipping Weight: 168 lbs.
NDP-50 Kynar, ANSI Flange
Dimensions: 18.63" W x 32.32" HNet Weight: 103 lbs. (46.7 kg)
Shipping Weight: 121 lbs.
NDP-50 Polypropylene, ANSI Flange
Dimensions: 18.63" W x 32.32" HNet Weight: 84 lbs. (38.1 kg)
Shipping Weight: 108 lbs.
NDP-50 Stainless Steel, ANSI Flange
Dimensions: 17.72" W x 30.55" HNet Weight: 162 lbs. (73.5 kg)
Shipping Weight: 173 lbs.
NDP-50 Stainless Steel, NPT
Dimensions: 17.72" W x 30.55" HNet Weight: 162 lbs. (73.5 kg)
Shipping Weight: 173 lbs.
prev
next
Yamada® NDP-50 series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 166 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar® (PVDF), groundable acetal, and polypropylene construction.
What separates Yamada from the rest of the pack is our air valve technology. Yamada uses a completely non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side is pulling the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
ACCESSORIES
Air Motor Kit |
K45-AM (metal center body) and K50-AM-PP (plastic center body) |
Liquid End Kits |
Aluminum: K50-MC, K50-MN, K50-ME, K50-MH, K50-MS, K50-MV, K50-MT Stainless Steel: K50-MC, K50-MN, K50-ME, K50-MH, K50-MS, K50-MV, K50-MT Cast Iron: K50-MC, K50-MN, K50-ME, K50-MH, K50-MS, K50-MV, K50-MT Polypropylene: K50-PC, K50-PN, K50-PE, K50-PH, K50-PS, K50-PV, K50-PT Kynar: K50-VE, K50-VH, K50-VS, K50-VV, K50-VT |
Filter / Regulators |
FR-5 and FR-5A (Auto Drain) |
Dampener |
|
Liquid Level Controller |
|
Controllers |
|
Diaphragm Monitor System |
|
DRy Run Detector |
The Yamada Advantage
Yamada Air Powered Double Diaphragm Pumps: Engineered for High Performance. Manufactured for Long Life.
Rugged, Bolted Construction
All Yamada pumps feature bolted construction, which eliminates leaks and simplifies post-maintenance reassembly. Bolted construction is superior to clamp band retainers, which frequently require frustrating, unnecessary leakage rebuilds from misalignment during reassembly.
Patented Air Valve Technology
Incorporated in every Yamada Air Powered Double Diaphragm pump
Yamada air valve technology is the heart of the air-powered double diaphragm pump and determines reliability. Yamada holds three patents on its field proven valve and enjoys a superior reputation throughout the industry.
Why Specify an AODD Pump?
- Handles a wide variety of fluids with high solids content
- Self priming
- Ability to run dry
- Variable flow rate and discharge pressure
- Portable/simple installation
- Dead head
- Shear sensitive
- Safe operation
- Submersible
- Pumping efficiency remains constant
Contact Us
Literatures & Drawings
Printable Specs
Maintenance Manuals
CAD Drawings
NDP-50 Aluminum (JPG)
NDP-50 Aluminum (DWG)
NDP-50 Aluminum (PDF)
NDP-50 Cast Iron, NPT (JPG)
NDP-50 Cast Iron, NPT (DWG)
NDP-50 Cast Iron, NPT (PDF)
NDP-50 Kynar®, Flange (JPG)
NDP-50 Kynar®, Flange (DWG)
NDP-50 Kynar®, Flange (PDF)
NDP-50 Polypropylene, Flange (JPG)
NDP-50 Polypropylene, Flange (DWG)
NDP-50 Polypropylene, Flange (PDF)
NDP-50 Stainless Steel, Flange (JPG)
NDP-50 Stainless Steel, Flange (DWG)
NDP-50 Stainless Steel, Flange (PDF)
NDP-50 Stainless Steel, NPT (JPG)
NDP-50 Stainless Steel, NPT (DWG)
NDP-50 Stainless Steel, NPT (PDF)
3D CAD Drawings
NDP-50 Aluminum (EPRT)
NDP-50 Aluminum (IGS)
NDP-50 Cast Iron (EPRT)
NDP-50 Kynar® (EPRT)
NDP-50 Kynar® (IGS)
NDP-50 Polypropylene (IGS)
NDP-50 Stainless Steel (EPRT)
NDP-50 Stainless Steel (IGS)
Performance Curve
Bill of Materials
NDP-50BAC
NDP-50BAE
NDP-50BAH
NDP-50BAN
NDP-50BAS
NDP-80BAT
NDP-50BAV
NDP-50BFC
NDP-50BFE
NDP-50BFH
NDP-50BFN
NDP-50BFS
NDP-50BFT
NDP-50BFV
NDP-50BPC
NDP-50BPE
NDP-50BPH
NDP-50BPN
NDP-50BPS
NDP-50BPT
NDP-50BPV
NDP-50BSC
NDP-50BSE
NDP-50BSH
NDP-50BSN
NDP-50BSS
NDP-50BST
NDP-50BSV
NDP-50BVE
NDP-50BVH
NDP-50BVS
NDP-50BVT
NDP-50BVV
Model Nomenclature
Videos
YAMADA PUMP
+더보기
Yamada® NDP-40 Series Double Diaphragm Pump
Yamada® NDP-32 Series Double Diaphragm Pump
Yamada® NDP-5 Diaphragm Pump Series
Yamada® DP-10/DP-15 Diaphragm Pump Series
Yamada® NDP-15 Diaphragm Pump Series
Yamada® NDP-20 Diaphragm Pump Series
Yamada® NDP-25 Series Double Diaphragm Pump
YAMADA - NDP-50
HUSKY PUMP
+ 더보기
Husky 15120 Air-Operated Diaphragm Pumps
Husky 15120 Air-Operated Diaphragm Pumps 1.5 inch Positive Displacement Double Diaphragm Pump
The Husky 15120 has a 1.5 inch (38.1 mm) connection and is available in polypropylene and PVDF.
/husky?seq=10
The Husky 15120 has a 1.5 inch (38.1 mm) connection and is available in polypropylene and PVDF.
이미지
The Husky 15120 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Benefits of the Husky 15120 double diaphragm pumps
- Overall improved efficiency (up to 40% more efficient)
- Highest fluid flow rate in its class
- Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
- Expanded material offering to handle endless applications
Benefits of the Husky 15120 Air Valve
- Increased Efficiency: Stall-free, low pulsation design provides smooth and rapid changeover for increased efficiency and minimized down time.
- Modular 4 bolt design: The air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump.
- Fewer parts: The complete air valve is externally accessible with minimal parts so it can be serviced faster than industry peer air valves.
| Overview | |
| Maximum fluid flow |
122 gpm (462 l/min)
|
| Maximum Fluid Discharge Pressure |
25 psi (8.6 bar, 0.86 MPa)
|
| Maximum size pumpable solids |
¼ in (6.3 mm)
|
| Fluid displacement per cycle |
0.66 gallons (2.5 liter)
|
Husky 15120 Performance
Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:
- Step 1 – Go to our Pump Selector Tool
- Step 2 – Fill in your pumps part number in the right corner
- Step 3 – Get an overview of all repair kits and accessories for your pump.
Husky 2200 Air-Operated Diaphragm Pumps
Husky 2200 Air-Operated Diaphragm Pumps 2 inch Positive Displacement Double Diaphragm Pump
The Husky 2200 has a 2 inch (50.8 mm) connection and is available in polypropylene and PVDF.
/husky?seq=9
The Husky 2200 has a 2 inch (50.8 mm) connection and is available in polypropylene and PVDF.
이미지
The Husky 2200 air-operated diaphragm pump features a single piece polypropylene center section for increased reliability and chemical compatibility, plus a patented, high-reliability modular air valve that is online serviceable.
This diaphragm pump is designed with a reinforced frame for improved reliability and will help to eliminate fluid leakage.
Benefits of the Husky 2200 double diaphragm pumps
- Overall improved air efficiency
- Highest fluid flow rate in its class
- Expanded material offering to handle endless applications
- Available with Overmolded diaphragms (up to 5 times longer diaphragm life)
Benefits of the Husky 2200 Air Valve
- Increased Efficiency: Stall-free, low pulsation design provides smooth and rapid changeover for increased efficiency and minimized down time.
- Modular 4 bolt design: The air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump.
- Fewer parts: The complete air valve is externally accessible with minimal parts so it can be serviced faster than industry peer air valves.
| Overview | |
| Maximum fluid flow |
200 gpm (757 l/min)
|
| Maximum Fluid Discharge Pressure |
125 psi (8.6 bar, 0.86 MPa)
|
| Maximum size pumpable solids |
3/8 in (9.5 mm)
|
| Fluid displacement per cycle |
1.6 g (6.1 liters)
|
Husky 2200 Performance
Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:
- Step 1 – Go to our Pump Selector Tool
- Step 2 – Fill in your pumps part number in the right corner
- Step 3 – Get an overview of all repair kits and accessories for your pump.
Husky™ 205 1/4" DIAPHRAGM PUMP
허스키 205 이중 다이어프램 펌프 0.25 인치 용적형 이중 다이어프램 펌프
폴리프로필렌, 아세탈 및 PVDF 재질의 1/4 인치(6.3 mm) 연결부
이 1/4 인치 용적형 이중 다이어프램 펌프는 정확하게 성형된 PTFE 및 Santoprene 재질의 다이어프램으로 향상된 성능을 제공하며 폴리프로필렌, 접지형 아세탈 및 PVDF 재질을 이용할 수 있습니다.
The Husky 205 air operated diaphragm pump features spring check valves for superior priming in any mounting configuration.
Benefits of the Husky 205 double diaphragm pumps
- True-formed PTFE and Santoprene diaphragms for enhanced performance
- Spring loaded checks allow the diaphragm pump to work in any orientation
- Inlet and Outlet are interchangeable
- Remote control option using an external controller
| Overview | |
| Maximum fluid flow |
5.0 gpm (18.9 l/min)
|
| Maximum Fluid Discharge Pressure |
100 psi (7 bars, 0.7 MPa)
|
| Maximum size pumpable solids |
0.06 in (1.5 mm)
|
| Fluid displacement per cycle |
0.012 g (0,045 liter)
|
Husky 205 Performance
Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:
- Step 1 – Go to our Pump Selector Tool
- Step 2 – Fill in your pumps part number in the right corner
- Step 3 – Get an overview of all repair kits and accessories for your pump
Husky™ 307 3/8" Air-Operated Double-Diaphragm Pump
허스키 307 이중 다이어프램 펌프 3/8 인치 용적형 이중 다이어프램 펌프
폴리프로필렌 및 아세탈 재질의 3/8 인치(9.4 mm) 연결부
이미지 비디오
허스키 307 이중 다이어프램 펌프는 20 psi(1.4 bar, 0.14 MPa)의 낮은 압력에서 작동하며 접지형 아세탈 및 폴리프로필렌 재질로 제공됩니다.
The Husky 307 air operated diaphragm pump features a stall-free low pulsation air valve that provides a smooth and rapid changeover.
Benefits of the Husky 307 double diaphragm pump
- Quick and easy assembly and disassembly design
- Easy to service air valve and ball checks
- Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
- Split manifold option to pump multiple fluids without mixing
- Every pump is tested prior to shipping
| Overview | |
| Maximum fluid flow |
6.5 gpm (26.5 l/min)
|
| Maximum Fluid Discharge Pressure |
100 psi (7 bars, 0.7 MPa)
|
| Maximum size pumpable solids |
1/16 in (1.5 mm)
|
| Fluid displacement per cycle |
0.02 g (0,076 liter)
|
Husky 307 Performance
Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:
- Step 1 – Go to our Pump Selector Tool
- Step 2 – Fill in your pumps part number in the right corner
- Step 3 – Get an overview of all repair kits and accessories for your pump
Husky™ 3300 3" Air-Operated Double-Diaphragm Pump
허스키 3300 이중 다이어프램 펌프 3 인치 용적형 이중 다이어프램 펌프
알루미늄, 폴리프로필렌 및 스테인리스강 재질의 3 인치(76.2 mm) 연결부
알루미늄, 폴리프로필렌 및 스테인리스강 재질의 3 인치(76.2 mm) 연결부
이미지 비디오
3 인치(76.2 mm)의 허스키 3300 에어 작동식 이중 다이어프램 펌프는 4개의 볼트 체결디자인을 채택하여 누설이 없는 균일한 실링 압력을 제공하며, 3개 부분으로 이루어진 매니폴드는 설치 유연성을 제고합니다. 알루미늄, 폴리프로필렌 및 스테인리스강 재질로 제공됩니다.
The Husky 3300 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
Benefits of the Husky 3300 double diaphragm pumps
- Overall improved efficiency (up to 40% more efficient)
- Highest fluid flow rate in its class
- Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
- Expanded material offering to handle endless applications
- Less parts than industry peers, the complete air valve is externally accessible so it can be serviced fast and easy without removing the diaphragm pump
- Modular air valve – Stall-free, low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time
- Offered in ATEX configuration.
| Overview | |
| Maximum fluid flow |
300 gpm (1135 lpm)
|
| Maximum Fluid Discharge Pressure |
100 psi (7 bars, 0.7 MPa)
|
| Maximum size pumpable solids |
½ in (13 mm)
|
| Fluid displacement per cycle |
2.9 g (11 liters)
|
Husky 3300 Performance
Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:
- Step 1 – Go to our Pump Selector Tool
- Step 2 – Fill in your pumps part number in the right corner
- Step 3 – Get an overview of all repair kits and accessories for your pump.
Husky™ 716 3/4" Air-Operated Double-Diaphragm Pump
허스키 716 이중 다이어프램 펌프 3/4 인치 용적형 이중 다이어프램 펌프
알루미늄 및 SST 재질의 3/4 인치 (19.1 mm) 연결부
알루미늄 및 SST 재질의 3/4 인치 (19.1 mm) 연결부
이미지
이 3/4 인치 이중 다이어프램 펌프에는 원격 제어 기능을 제공하는 외부 제어기가 있으며 알루미늄 및 316 스테인리스강 구조로 제공됩니다.
The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
Benefits of the Husky 716 double diaphragm pumps
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
| Overview | |
| Maximum fluid flow |
16 gpm (61 l/min)
|
| Maximum Fluid Discharge Pressure |
100 psi (7 bars, 0.7 MPa)
|
| Maximum size pumpable solids |
3/32 in (2.5 mm)
|
| Fluid displacement per cycle |
0.04 in (0,64 liter)
|
Husky 716 Performance
Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:
- Step 1 – Go to our Pump Selector Tool
- Step 2 – Fill in your pumps part number in the right corner
- Step 3 – Get an overview of all repair kits and accessories for your pump.
Husky™ 1590 1-1/2" Air-Operated Double-Diaphragm Pump
허스키 1590 이중 다이어프램 펌프 1.5 인치 용적형 이중 다이어프램 펌프
폴리프로필렌, 아세탈, PVDF, 알루미늄 및 SST 재질의 1-1/2 인치(38.2 mm) 연결부
폴리프로필렌, 아세탈, PVDF, 알루미늄 및 SST 재질의 1-1/2 인치(38.2 mm) 연결부
이미지
이 1-1/2 인치 이중 다이어프램 펌프에는 온라인 서비스가 가능하며 가혹한 환경에 적합하도록 에어 섹션이 에폭시 코팅된 높은 신뢰성의 특허출원 폐심형 에어 밸브가 제공되어 있습니다.
The Husky 1590 air operated diaphragm pump features a patented, high-reliability closed center air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.
The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
Benefits of the Husky 1590 double diaphragm pumps
- Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps in its class
- Expanded material offering to handle endless applications
- Fewer parts than industry peers, the air valve is externally accessible so it can be serviced fast and easy without uninstalling the diaphragm pump
- Offered in ATEX configuration.
| Overview | |
| Maximum fluid flow |
100 gpm (378.5 l/min)
|
| Maximum Fluid Discharge Pressure |
120 psi (8,4 bars, 0,84 MPa)
|
| Maximum size pumpable solids |
3/16 in (4.8 mm)
|
| Fluid displacement per cycle |
0.5 g (1,9 liter)
|
Husky 1590 Performance
Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:
- Step 1 – Go to our Pump Selector Tool
- Step 2 – Fill in your pumps part number in the right corner
- Step 3 – Get an overview of all repair kits and accessories for your pump.
Husky™ 515 1/2" Air-Operated Double-Diaphragm Pump
허스키 515 이중 다이어프램 펌프 0.5 인치 용적형 이중 다이어프램 펌프
폴리프로필렌, 아세탈 및 PVDF 재질의 1/2 인치(12.7 mm) 연결부
폴리프로필렌, 아세탈 및 PVDF 재질의 1/2 인치(12.7 mm) 연결부
이미지
1/2 인치(12.7 mm)의 허스키 515 이중 다이어프램 펌프는 20 psi(1.4 bar, 0.14 MPa)의 낮은 압력에서 작동하며 접지형 아세탈, 폴리프로필렌 및 PVDF 재질의 구조로 제공됩니다.
The Husky 515 air operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The bolt through fluid cover design eliminates leaks and makes that this Husky providing better safety and more reliability.
Benefits of the Husky 515 double diaphragm pump
- Center- and end-porting
- No mechanical seals to causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
- Split manifold option to pump multiple fluids without mixing
| Overview | |
| Maximum fluid flow |
15 gpm (57 l/min)
|
| Maximum Fluid Discharge Pressure |
100 psi (7 bars, 0.7 MPa)
|
| Maximum size pumpable solids |
3/32 in (2.5 mm)
|
| Fluid displacement per cycle |
0.04 g (0,15 liter)
|
Husky 515 Performance
Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:
- Step 1 – Go to our Pump Selector Tool
- Step 2 – Fill in your pumps part number in the right corner
- Step 3 – Get an overview of all repair kits and accessories for your pump
ALL-FLO PUMP
+ 더보기
ALL-FLO 3/4" AIR DIAPHRAGM PUMP
3/4” A075 Polypropylene
Up to 17 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
3/4” A075 Polypropylene
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A075-NPP-GNPN-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A075-NPP-SSPE-Y70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A075-NPP-TTPT-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A075-NPP-VVPV-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Right/Discharge Right (NPT/BSP Only) |
3/4” A075 PVDF
Up to 17 GPM
Elastomer Available in: Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
3/4” A075 PVDF
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A075-NPK-SSKE-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A075-NPK-TTKT-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A075-NPK-VVKV-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Right/Discharge Right (NPT/BSP Only) |
3/4” A075 Conductive Nylon
Up to 17 GPM
Elastomer Available in: Geolast®, PTFE, Viton
Liquid Connections Available in: FNPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
3/4” A075 Conductive Nylon
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A075-NPY-GN3N-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A075-NPY-TT3T-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A075-NPY-VV3V-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Right/Discharge Right (NPT/BSP Only) |
ALL-FLO 1/4" AIR DIAPHRAGM PUMP
1/4" A025 Polypropylene
Up to 4.3 GPM
Elastomer Available in: Santoprene®, PTFE,Geolast®
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/16 Inch (1.6mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/4" A025 Polypropylene
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A025-SQP-GTPN-Y70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A025-SQP-STPE-Y70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A025-SQP-TTPT-Y70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only) |
1/4" A025 PVDF
Up to 4.3 GPM
Elastomer Available in: Santoprene®, PTFE
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/16 Inch (1.6mm)
Max Suction Lift (Dry): 17ft-H20 (5.0m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/4" A025 PVDF
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A025-SQK-STKE-Y70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A025-SQK-TTKT-Y70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only) |
1/4" A025 Conductive Nylon
Up to 4.3 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/16 Inch (1.6mm)
Max Suction Lift (Dry): 17ft-H20 (5.0m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/4" A025 Conductive Nylon
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A025-SQY-GTYN-YF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A025-SQY-STYE-YF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A025-SQY-TTYT-YF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only) |
ALL-FLO 3/8" AIR DIAPHRAGM PUMP
3/8” C038 Polypropylene
Up to 9 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/16 Inch (1.6mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
3/8” C038 Polypropylene
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C038-SQP-GGPN-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| C038-SQP-SSPE-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| C038-SQP-TTPT-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| C038-SQP-TVPV-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only) |
3/8” C038 PVDF
Up to 9 GPM
Elastomer Available in: Santoprene®, PTFE
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/16 Inch (1.6mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
3/8” C038 PVDF
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C038-SQK-SSKE-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| C038-SQK-TTKT-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| C038-SQK-TVKV-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only) |
3/8” C038 Conductive Nylon
Up to 9 GPM
Elastomer Available in: Geolast®, PTFE
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/16 Inch (1.6mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
3/8” C038 Conductive Nylon
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C038-SQY-GG3N-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Left (NPT/BSP Only)Suction Right/Discharge Left (NPT/BSP Only) |
| C038-SQY-TT3T-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| C038-SQY-TV3V-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge Right |
3/8" C038 Drum Ready Pump
Up to 9 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
3/8" C038 Drum Ready Pump
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C038-SQK-TTKT-N70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFE Ball | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| C038-SQP-TTPT-N70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFE Ball | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| C038-SQY-TT3T-NF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFE Ball | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| S038-SQK-SEKE-N70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| S038-SQK-TVKV-N70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| S038-SQP-GNPN-N70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| S038-SQP-SEPE-N70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| S038-SQP-TVPV-N70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| S038-SQY-GNYN-NF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | NylonA non-metallic material, suitable for most solvents and oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| S038-SQY-TVYV-NF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge Right |
3/8” S038 Solids Handling
Up to 9 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 17ft-H20 (5.2m)
Max Suction Lift (Wet): 30ft-H20 (9.1m)
Air Inlet: ¼ Inch FNPT
3/8” S038 Solids Handling
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| S038-SQK-SEKE-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S038-SQK-TVKV-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S038-SQP-GNPN-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S038-SQP-SEPE-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S038-SQP-TVPV-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S038-SQY-GNYN-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | NylonA non-metallic material, suitable for most solvents and oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Left (NPT/BSP Only)Suction Right/Discharge Left (NPT/BSP Only) |
| S038-SQY-TVYV-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only) |
ALL-FLO 1/2" AIR DIAPHRAGM PUMP
1/2” A050 Aluminum
Up to 17 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: ¼ Inch FNPT
1/2” A050 Aluminum
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A050-BAA-GGPN-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BAA-GTPN-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BAA-SSPE-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BAA-TTYT-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BAA-VVYV-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NAA-GGPN-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NAA-GTPN-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NAA-SSAE-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NAA-SSPE-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NAA-TTYT-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NAA-VVYV-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Right/Discharge Right |
1/2” A050 Stainless Steel
Up to 17 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: ¼ Inch FNPT
1/2” A050 Stainless Steel
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A050-BA3-GG3N-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BA3-GT3N-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BA3-SS3E-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BA3-TT3T-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BA3-VV3V-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BP3-GG3N-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BP3-SS3E-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-BP3-TT3T-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NA3-GG3N-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NA3-GT3N-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NA3-SS3E-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NA3-TT3T-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NA3-VV3V-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NP3-GG3N-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NP3-TT3T-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-NP3-VV3V-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Right/Discharge Right |
1/2” A050 Polypropylene
Up to 17 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/2” A050 Polypropylene
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A050-SPP-GGPN-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A050-SPP-SSPE-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A050-SPP-SSPE-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A050-SPP-TTPT-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A050-SPP-VVPV-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only) |
1/2” C050 Clamped Polypropylene
Up to 17 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/2” C050 Clamped Polypropylene
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C050-SPK-TTKT-G70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C050-SPP-GGPN-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C050-SPP-SSPE-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C050-SPP-TTPT-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C050-SPP-VVPV-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Center Rear/Discharge Center Rear |
1/2” A050 PVDF
Up to 17 GPM
Elastomer Available in: Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/2” A050 PVDF
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A050-SPK-SSKE-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A050-SPK-TTKT-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A050-SPK-VVKV-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only) |
1/2” C050 Clamped PVDF
Up to 17 GPM
Elastomer Available in: Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/2” C050 Clamped PVDF
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C050-SPK-SSKE-G70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C050-SPK-VVKV-G70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge Center Rear |
1/2” A050 Conductive Nylon
Up to 17 GPM
Elastomer Available in: Geolast®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/2” A050 Conductive Nylon
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A050-SPY-GN3N-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A050-SPY-TT3T-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| A050-SPY-VV3V-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only) |
1/2” S050 Metal Solid Handling
Up to 17 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 3/8 Inch (9.5mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: 3/4 Inch FNPT
1/2” S050 Metal Solid Handling
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| S050-BA3-GN3N-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-BA3-SE3E-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-BA3-VV3V-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-BAA-GNAN-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-BAA-SEAE-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-BAA-TVAV-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-BAA-VVAV-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-BP3-SE3E-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-NA3-GN3N-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-NA3-SE3E-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-NA3-VV3V-S70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-NAA-GNAN-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-NAA-SEAE-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-NAA-TVAV-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Right/Discharge RightSuction Right/Discharge Right |
| S050-NAA-VVAV-S30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Right/Discharge Right |
1/2” S050 Plastic Solid Handling
Up to 17 GPM
Elastomer Available in: Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 3/8 Inch (9.5mm)
Max Suction Lift (Dry): 20ft-H20 (6m)
Max Suction Lift (Wet): 30ft-H20 (9.1m)
Air Inlet: ¼ Inch FNPT
1/2” S050 Plastic Solid Handling
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| S050-SPK-SEKE-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S050-SPK-V5KV-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | FDA Viton®FDA Viton® | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S050-SPP-GNPN-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S050-SPP-SEPE-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S050-SPP-V5PV-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | FDA Viton®FDA Viton® | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S050-SPY-GN3N-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only)Suction Right/Discharge Right (NPT/BSP Only) |
| S050-SPY-V5YV-SF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | FDA Viton®FDA Viton® | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Right/Discharge Right (NPT/BSP Only) |
1/2” A050 Drum Ready Pump
Up to 17 GPM
Elastomer Available in: Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/2” A050 Drum Ready Pump
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A050-SPK-SSKE-N70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| A050-SPK-TTKT-N70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| A050-SPK-VVKV-N70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| A050-SPP-GGPN-N70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| A050-SPP-SSPE-N70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| A050-SPP-TTPT-N70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| A050-SPP-VVPV-N70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| A050-SPY-GG3N-NF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| A050-SPY-GN3N-NF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge RightSuction Bottom/Discharge Right |
| A050-SPY-TT3T-NF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge TopSuction Bottom/Discharge Top |
| A050-SPY-VV3V-NF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Bottom/Discharge Right |
ALL-FLO 1" AIR DIAPHRAGM PUMP
1” A100 Aluminum
Up to 41 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton, Nitrile
Liquid Connections Available in: NPT, BSPT
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 17ft-H20 (5.2m)
Max Suction Lift (Wet): 30ft-H20 (9.1m)
Air Inlet: 1/2 Inch FNPT
1” A100 Aluminum
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A100-BAA-GGPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-BAA-GTPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-BAA-NNPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-BAA-SSPE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-BAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-BAA-VVYV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-NAA-GGPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-NAA-GTPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-NAA-NNPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-NAA-SSPE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-NAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-NAA-VVYV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center Rear |
1" A100 Stainless Steel
Up to 41 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: NPT, BSPT
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 17ft-H20 (5.2m)
Max Suction Lift (Wet): 30ft-H20 (9.1m)
Air Inlet: 1/2 Inch FNPT
1" A100 Stainless Steel
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A100-BA3-GG3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-BA3-VV3V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-NA3-GG3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-NA3-SS3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-NA3-TT3T-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A100-NA3-VV3V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center Rear |
1” A100 Polypropylene
Up to 41 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: ANSI/DIN Flange, FNPT, FBSPT
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1” A100 Polypropylene
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A100-CPP-GGPN-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT & ANSI / DIN FlangeNPT & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-CPP-SSPE-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT & ANSI / DIN FlangeNPT & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-CPP-TTPT-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT & ANSI / DIN FlangeNPT & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-CPP-VVPV-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT & ANSI / DIN FlangeNPT & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-EPP-GGPN-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSP & ANSI / DIN FlangeBSP & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-EPP-SSPE-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSP & ANSI / DIN FlangeBSP & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-EPP-TTPT-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | BSP & ANSI / DIN FlangeBSP & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-EPP-VVPV-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSP & ANSI / DIN FlangeBSP & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-FPP-GGPN-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-FPP-SSPE-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-FPP-TTPT-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-FPP-VVPV-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge Right |
1” C100 Polypropylene Clamped Style Pump
Up to 41 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in:ANSI/DIN Flange, FNPT, FBSPT
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1” C100 Polypropylene Clamped Style Pump
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C100-BPP-GGPN-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-BPP-SSPE-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-BPP-TTPT-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-BPP-VVPV-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-NPP-GGPN-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-NPP-SSPE-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-NPP-TTPT-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-NPP-VVPV-G70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Rear/Discharge Center Rear |
1” A100 PVDF
Up to 41 GPM
Elastomer Available in: Santoprene®, PTFE, Viton
Liquid Connections Available in: ANSI/DIN Flange
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1” A100 PVDF
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A100-CPK-SSKE-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT & ANSI / DIN FlangeNPT & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-CPK-TTKT-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT & ANSI / DIN FlangeNPT & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-CPK-VVKV-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT & ANSI / DIN FlangeNPT & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-EPK-SSKE-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSP & ANSI / DIN FlangeBSP & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-EPK-TTKT-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | BSP & ANSI / DIN FlangeBSP & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-EPK-TTKT-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSP & ANSI / DIN FlangeBSP & ANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-FPK-SSKE-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-FPK-TTKT-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| A100-FPK-VVKV-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge Right |
1” C100 PVDF Clamped Style Pump
Up to 41 GPM
Elastomer Available in: Santoprene®, PTFE, Viton
Liquid Connections Available in: ANSI/DIN Flange, FNPT, FBSPT
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1” C100 PVDF Clamped Style Pump
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C100-BPK-SSKE-G70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-BPK-TTKT-G70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-BPK-VVKV-G70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-NPK-SSKE-G70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-NPK-TTKT-G70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Rear/Discharge Center RearSuction Center Rear/Discharge Center Rear |
| C100-NPK-VVKV-G70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Rear/Discharge Center Rear |
1” S100 Metal Solid Handling
Up to 41 GPM
Elastomer Available in: Geolast®, Santoprene®, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/2 Inch (8.2mm)
Max Suction Lift (Dry): 18ft-H20 (5.5m)
Max Suction Lift (Wet): 27ft-H20 (8.4m)
Air Inlet: 1/2 Inch FNPT
1” S100 Metal Solid Handling
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| S100-BA3-GN3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-BA3-SE3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-BA3-V53V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | FDA Viton®FDA Viton® | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-BAA-GNAN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-BAA-SEAE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-BAA-V5AV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | FDA Viton®FDA Viton® | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-NA3-GN3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-NA3-SE3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-NA3-V53V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | FDA Viton®FDA Viton® | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-NAA-GNAN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-NAA-SEAE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| S100-NAA-V5AV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | FDA Viton®FDA Viton® | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center Rear |
1” S100 Plastic Solid Handling
Up to 41 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: ANSI/DIN Flange
Max Solids: 3/4 Inch (19mm)
Max Suction Lift (Dry): 18ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1” S100 Plastic Solid Handling
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| S100-FPK-SEKE-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S100-FPK-V5KV-S70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | FDA Viton®FDA Viton® | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S100-FPP-GNPN-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Nitrile Max-Pass®Max-Pass® valve made from Nitrile rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S100-FPP-SEPE-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDM Max-Pass®Max-Pass® valve made from EPDM rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge RightSuction Right/Discharge Right |
| S100-FPP-V5PV-S70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | FDA Viton®FDA Viton® | Viton® Max-Pass®Max-Pass® valve made from Viton® rubber. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Right/Discharge Right |
1" C100 Classic Clamped Style Drum Ready Pump
Up to 41 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT
Max Solids: 1/8 Inch (3.2mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1" C100 Classic Clamped Style Drum Ready Pump
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C100-NPK-SSKE-L70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Bottom/Discharge Center RearSuction Bottom/Discharge Center Rear |
| C100-NPK-TTKT-L70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Bottom/Discharge Center RearSuction Bottom/Discharge Center Rear |
| C100-NPK-VVKV-L70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Bottom/Discharge Center RearSuction Bottom/Discharge Center Rear |
| C100-NPP-GGPN-L70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Bottom/Discharge Center RearSuction Bottom/Discharge Center Rear |
| C100-NPP-GNPN-L70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Bottom/Discharge Center RearSuction Bottom/Discharge Center Rear |
| C100-NPP-SSPE-L70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Bottom/Discharge Center RearSuction Bottom/Discharge Center Rear |
| C100-NPP-TTPT-L70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Bottom/Discharge Center RearSuction Bottom/Discharge Center Rear |
| C100-NPP-VVPV-L70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Bottom/Discharge Center Rear |
ALL-FLO 1½" AIR DIAPHRAGM PUMP
1-1/2" A150 Aluminum
Up to 130 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 22ft-H20 (6.7m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: 3/4 Inch FNPT
1-1/2" A150 Aluminum
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A150-BAA-GGPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BAA-GGPN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BAA-GTPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BAA-GTPN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BAA-SSPE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BAA-SSPE-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BAA-TTYT-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BAA-VVYV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BAA-VVYV-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NAA-GGPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NAA-GGPN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NAA-GTPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NAA-GTPN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NAA-SSPE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NAA-SSPE-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NAA-TTYT-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NAA-VVYV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NAA-VVYV-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center Rear |
1-1/2" A150 Stainless Steel
Up to 130 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: ANSI/DIN Flange, FNPT, FBSPT
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 22ft-H20 (6.7m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: 3/4 Inch FNPT
1-1/2" A150 Stainless Steel
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A150-B33-GG3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-B33-GG3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-B33-SS3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-B33-SS3E-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-B33-TT3T-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-B33-TT3T-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-B33-VV3V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-B33-VV3V-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BA3-GG3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BA3-SS3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BA3-SS3E-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BA3-TT3T-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BA3-TT3T-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BA3-VV3V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-BA3-VV3V-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-F33-GG3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-F33-GG3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-F33-SS3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-F33-SS3E-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-F33-TT3T-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-F33-TT3T-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-F33-VV3V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-F33-VV3V-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-FA3-GG3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-FA3-GG3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-FA3-SS3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-FA3-SS3E-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-FA3-TT3T-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-FA3-TT3T-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-FA3-VV3V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-FA3-VV3V-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-N33-GG3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-N33-GG3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-N33-SS3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-N33-SS3E-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-N33-TT3T-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-N33-TT3T-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-N33-VV3V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-N33-VV3V-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Stainless SteelStainless Steel | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NA3-GG3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NA3-GG3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NA3-SS3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NA3-SS3E-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NA3-TT3T-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NA3-TT3T-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NA3-VV3V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A150-NA3-VV3V-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center Rear |
1-1/2” C150 Polypropylene
Up to 130 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE
Liquid Connections Available in: ANSI/DIN Flange
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 13ft-H20 (3.9m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1-1/2” C150 Polypropylene
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C150-FPP-GGPN-B70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| C150-FPP-GNPN-B70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| C150-FPP-SSPE-B70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| C150-FPP-TTPT-B70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center Rear |
1-1/2” C150 PVDF
Up to 130 GPM
Elastomer Available in: Santoprene®, PTFE
Liquid Connections Available in: ANSI/DIN Flange
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 13ft-H20 (3.9m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1-1/2” C150 PVDF
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| C150-FPK-SSKE-B70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| C150-FPK-TTKT-B70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center Rear |
ALL-FLO 2" AIR DIAPHRAGM PUMP
2" A200 Aluminum
Up to 180 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton, Nitrile
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 24ft-H20 (7.3m)
Max Suction Lift (Wet): 32ft-H20 (9.8m)
Air Inlet: 3/4 Inch FNPT
2" A200 Aluminum
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A200-BAA-GGPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-BAA-GGPN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-BAA-GTPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-BAA-GTPN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-BAA-NNPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-BAA-SSPE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-BAA-SSPE-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-BAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | NylonA non-metallic material, suitable for most solvents and oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-BAA-TTYT-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | NylonA non-metallic material, suitable for most solvents and oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-BAA-VVYV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-BAA-VVYV-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-GGPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-GGPN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-GTPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-GTPN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-NNPN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-SSPE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-SSPE-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-TTYT-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-VVYV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A200-NAA-VVYV-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center Rear
 2" A200 Stainless SteelUp to 180 GPMElastomer Available in: Geolast®, Santoprene®, PTFE, Viton
Liquid Connections Available in: FNPT, FBSPT, ANSI/DIN Flange
Max Solids: 1/4 Inch (6.4mm)
Max Suction Lift (Dry): 24ft-H20 (7.3m)
Max Suction Lift (Wet): 32ft-H20 (9.8m)
Air Inlet: 3/4 Inch FNPT
2" A200 Stainless Steel
|
ALL-FLO 3" AIR DIAPHRAGM PUMP
3" A300 Aluminum
Up to 255 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton®
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 11/16 Inch (11mm)
Max Suction Lift (Dry): 20ft-H20 (6.1m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: 3/4 Inch FNPT
3" A300 Aluminum
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A300-BAA-GGNN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-GGNN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-GTNN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-GTNN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-SSEE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-SSEE-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-TTYT-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-VVYV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-VVYV-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-GGNN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-GGNN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-GTNN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-GTNN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-SSEE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-SSEE-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-TTYT-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-VVVV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-VVYV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-VVYV-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center Rear |
3" A300 Stainless
Up to 255 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton®
Liquid Connections Available in: ANSI/DIN Flange
Max Solids: 11/16 Inch (11mm)
Max Suction Lift (Dry): 20ft-H20 (6.1m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: 3/4 Inch FNPT
3" A300 Stainless
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A300-FA3-GG3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-GG3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-GN3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-GN3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-GT3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-GT3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-SS3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-SS3E-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-TT3T-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-TT3T-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-VV3V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-VV3V-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center Rear |
3" P300 Polyethylene
Up to 255 GPM
Elastomer Available in: EPDM, PTFE
Liquid Connections Available in: FNPT, FBSPT, ANSI/DIN Flange
Max Solids: 9/16 Inch (15mm)
Max Suction Lift (Dry): 16.4ft-H20 (5m)
Max Suction Lift (Wet): 29.5ft-H20 (9m)
Air Inlet: 3/4 Inch FNPT
3" P300 Polyethylene
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| P300-AHH-EEHE-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | HDPE High-density polyethylene | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI FlangeANSI Flange Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-AHH-PTHT-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | HDPE High-density polyethylene | PTFEThermoplastic material that is inert to most chemicals. | ANSI FlangeANSI Flange Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-BHH-EEHE-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | HDPE High-density polyethylene | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-BHH-PTHT-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | HDPE High-density polyethylene | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-DHH-EEHE-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | HDPE High-density polyethylene | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | DIN FlangeDIN Flange Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-DHH-PTHT-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | HDPE High-density polyethylene | PTFEThermoplastic material that is inert to most chemicals. | DIN FlangeDIN Flange Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-NHH-EEHE-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | HDPE High-density polyethylene | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-NHH-PTHT-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | HDPE High-density polyethylene | PTFEThermoplastic material that is inert to most chemicals. | NPT | Center Suction & Discharge w/ 180° Adjustable Rotation |
WILDEN PUMP
+ 더보기
WILDEN METAL PUMP - P.025
 |
||||||||||||
|
||||||||||||
 |
||||||||||||
|
||||||||||||
 |
||||||||||||
 |
WILDEN METAL PUMP - P1
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
 |
WILDEN METAL PUMP - P200
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
 |
WILDEN METAL PUMP - PV4
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
 |
WILDEN METAL PUMP - PV8
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
 |
WILDEN METAL PUMP - PX15
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
 |
WILDEN PLASTIC PUMP - P.025
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
 |
WILDEN PLASTIC PUMP - P1
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
 |
VERDER PUMP
+ 더보기
VERDER METAL PUMP - VA80
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
 |
||||||||||||||||
|
||||||||||||||||
 |
VERDER METAL PUMP - VA50
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
 |
||||||||||||||||
|
||||||||||||||||
 |
VERDER METAL PUMP - VA40
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
VERDER METAL PUMP - VA25
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
 |
||||||||||||||||
|
||||||||||||||||
 |
VERDER METAL PUMP - VA20
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
 |
||||||||||||||||
|
||||||||||||||||
 |
VERDER PLASTIC PUMP - VA50
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
 |
||||||||||||||||
|
||||||||||||||||
 |
VERDER PLASTIC PUMP - VA40
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
 |
||||||||||||||||
|
||||||||||||||||
 |
VERDER PLASTIC PUMP - VA25
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
 |
||||||||||||||||
|
||||||||||||||||
 |
공지사항
+ 더보기
[공지]홈페이지가 새롭게 단장하여 오픈 하였습니다.
2015-03-06
/notice?seq=3
견적 문의
+ 더보기
[공지]견적의뢰시 이렇게 작성 부탁 드립니다.
2015-03-06
/estimation?seq=2
첨부 파일에 있는 펌프 수리 Kit 구입 할수 있는지요
답변 준비중
/estimation?seq=209
견적 문의 드립니다. (금일중 답변 요청)
답변 준비중
/estimation?seq=207
견적 문의드립니다.
답변 준비중
/estimation?seq=206
NDP-25BAS
답변 준비중
/estimation?seq=205
/DP-15BAN%20performance%20curve.png){kind=link}
/DP-15BAT%20performance%20curve.png){kind=link}
