The DP-F Series pump range offers 5 different sized models of clean room menufactured process pumps suitable for high purity and corrosive applications. Utilizing the patented Yamada C-Spool these pumps are simple and easily installed into a process system.

DP-5F

DP-10F

DP-20F
![]() |
![]() |
DP-25F | DP-38F |
Model name | DP-5F※1 | DP-10F | DP-20F | DP-25F ※2 |
DP-38F ※2 |
||||||||||||||||||||||||||||||||||||
Nominal port size | 1/4″(8A) | 3/8″(10A) | 3/4″(20A) | 1″(25A) | 1″(25A) | ||||||||||||||||||||||||||||||||||||
Connection to liquid |
Inlet | Rc1/4(F) | Rc3/8(F) ※3 |
JIS 10A flange or equivalent |
Rc3/4(F) ※3 |
JIS 20A flange or equivalent |
JIS 25A flange or equivalent |
||||||||||||||||||||||||||||||||||
Outlet | |||||||||||||||||||||||||||||||||||||||||
エア接続※5 |
Inlet (エアコック付) |
Rc1/4(F) | Rc3/8(F) | Rc1/2(F) | |||||||||||||||||||||||||||||||||||||
Exhaust | Rc3/8(F) (silencer contained) |
Rc3/8(F) (silencer contained) |
Rc3/4(F) (silencer contained) |
||||||||||||||||||||||||||||||||||||||
Material |
Wetted body | Fluoric resin (PTFE,PFA) |
|||||||||||||||||||||||||||||||||||||||
Diaphragm, Valve, Seat | Fluoric resin (PTFE) |
||||||||||||||||||||||||||||||||||||||||
Non Wetted body | PPS resin | Polypropylene (PP) |
High-density polyethylene (HDPE) |
||||||||||||||||||||||||||||||||||||||
Air supply pressure range | 0.2~0.5MPa | 0.2~0.7MPa | |||||||||||||||||||||||||||||||||||||||
Max discharge pressure |
0.5MPa |
0.7MPa |
|||||||||||||||||||||||||||||||||||||||
Discharge volume/cycle※4 |
13mL |
65mL |
150mL |
300mL |
700mL |
||||||||||||||||||||||||||||||||||||
Max discharge volume※6 | 11L/min | 27L/min | 54L/min | 64L/min | 95L/min | ||||||||||||||||||||||||||||||||||||
Max air consumption | 170 L/min(ANR) |
250 L/min(ANR) |
350 L/min(ANR) |
900 L/min(ANR) |
1500 L/min(ANR) |
||||||||||||||||||||||||||||||||||||
Max slurry diameter※7 | ― | 1mm or smaller | 2mm or smaller | 3mm or smaller | |||||||||||||||||||||||||||||||||||||
Viscosity limit |
0.5Pa-s or lower |
1Pa-s or lower |
2Pa-s or lower |
2.5Pa-s or lower |
|||||||||||||||||||||||||||||||||||||
Environmental |
Ambient |
0~70℃ | |||||||||||||||||||||||||||||||||||||||
Liquid |
0~80℃ | ||||||||||||||||||||||||||||||||||||||||
Noise level | 71dB | 82dB | 85dB | 88dB |
90dB |
||||||||||||||||||||||||||||||||||||
Weight |
3.4kg |
6.7kg |
7.2kg |
14.6kg |
15.5kg |
32kg |
52kg |
※1:The DP-5F valve is a flat (plate) type.
※2:Since a DP-25F and a DP-38F are to be produced on orders, be sure to check the delivery date.
※3:The suction inlet or discharge outlet of a DP-10F/20F pump can be connected with an NPT screw orANSI flange (custom-designed) as well as a standard RC screw or flange.
※4:The maximum discharged liquid amount and/or self-suction capability are based on the test datameasured with using fresh water at the room temperature (20oC). In addition, the amount of dis-charged liquid varies depending on the supplied air pressure or pump head. Please check the per-formance curve for details.
※5:Use the clean air that has passed through a 1-μm filter or nitrogen gas (N2) as air to be supplied tothe pump.
*When you use a resin pump, it may not offer the designed performance due to significant change oftemperature. To maintain its performance, be careful to install the pump or store its parts.
*Any flat valve type of pumps cannot handle slurry.
Valve type |
Connection |
||
Pump size |
Screw(PT) |
Flange |
|
Ball |
5 |
― |
― |
10 |
|||
20 |
|||
25 |
― |
||
38 |
― |
||
Flat |
5 |
― |
|
10 |
|||
20 |
|||
25 |
― |
||
38 |
― |
![]() Dimensions (PDF) |
|
DP-5F | DP-5F、FH |
DP-5FH | |
DP-10F(Rc) | DP-10F |
DP-10F(Flange) | |
DP-20F(Rc) | DP-20F |
DP-20F(Flange) | |
DP-25F | DP-25F |
DP-38F | DP-38F |
Model | ![]() Operation manual (PDF) |
![]() Maintenance manual (PDF) |
![]() CAD data (DXF) |
DP-5F |
NDP 209U-09 | NDP 032M-13 | DP-5F(PT) |
DP-5FH |
|||
DP-10F | DP-10F(PT) DP-10F(FL) |
||
DP-20F | DP-20F(PT) DP-20F(FL) |
||
DP-25F | DP-25F(FL) | ||
DP-38F | DP-38F(FL) |